Axis Communications P3363-VE user manual Ieee, Go to System Options Security Https

Page 42

AXIS P3363–VE Network Camera

System Options

HTTPS

HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a web protocol providing encrypted browsing. HTTPS can also be used by users and clients to verify that the correct device is being accessed. The security level provided by HTTPS is considered adequate for most commercial exchanges.

The Axis product can be configured to require HTTPS when users from different user groups (administrator, operator, viewer) connect.

To use HTTPS, an HTTPS certificate must first be installed. Go to System Options > Security > Certificates to install and manage certificates. See Certificates, on page 43.

To enable HTTPS on the Axis product:

1.Go to System Options > Security > HTTPS

2.Select an HTTPS certificate from the list of installed certificates.

3.Optionally, click Ciphers and select the encryption algorithms to use for SSL.

4.Set the HTTPS Connection Policy for the different user groups.

5.Click Save to enable the settings.

To access the Axis product via the desired protocol, enter https:// or http:// in the address field in a browser.

The HTTPS port can be changed on the System Options > Network > TCP/IP > Advanced page.

IEEE 802.1X

IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 802.1X is based on EAP (Extensible Authentication Protocol).

To access a network protected by IEEE 802.1X, devices must authenticate themselves. The authentication is performed by a third-party entity called an authentication server, typically a RADIUS server, examples of which are FreeRADIUS and Microsoft Internet Authentication Service.

In Axis' implementation, the network device and the authentication server authenticate themselves with the help of digital certificates using EAP-TLS (Extensible Authentication Protocol - Transport Layer Security). The certificates are provided by an Certification Authority (CA). You need:

•a CA certificate to validate the identity of the authentication server

•a CA-signed client certificate and a private key to authenticate the network device. To allow the network device to access a network protected by IEEE 802.1X:

1.Obtain a CA certificate, a client certificate and a client private key (contact your network administrator).

2.Go to Setup > System Options > Security > IEEE 802.1X and upload the CA certificate, the client certificate and the client private key.

3.Under Settings, select the EAPOL version, provide your EAP identity and private key password.

4.Check the box to enable IEEE 802.1X and click Save.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Axis P3363-VE Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3363-VE Network CameraTechnical Specifications Connectors Hardware OverviewHardware Overview LED Indicators Color IndicationAxis P3363-VE Network Camera Accessing the Product Accessing the ProductAccess from a Browser Set Power Line Frequency Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedLive View Controls on the Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis P3363-VE Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio ImageStream Profiles 264Image Appearance Video and Audio Camera SettingsExposure Settings White BalanceSet Shutter to Iris adjustmentView Area Day/NightGo to Video & Audio Video Stream and select the Image tab OverlayOverlay Image Go to Video & Audio Overlay ImagePrivacy Mask Focus & ZoomGo to Video & Audio Focus & Zoom Audio Settings Audio ModesAudio Input Audio Clips Audio OutputLive View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsAxis P3363-VE Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourAdvanced LimitsControls Camera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersLow level 0% Default valuesAudio Detection Recommended valuesApplications Install ApplicationApplications Application LicensesAxis P3363-VE Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlRecipient Use with action RecipientsSchedules Go to Events Recipients and click AddRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingSecurity System OptionsSystem Options UsersIeee Go to System Options Security HttpsCertificates CertificatesGo to System Options Security Ieee Date & Time Audio SupportGo to System Options Security Certificates Basic TCP/IP Settings NetworkDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourPorts Ports & DevicesNetwork Share Go to System Options Storage Click Network ShareMaintenance SupportScripting Reset to Factory Default SettingsPlain Config File UploadAxis P3363-VE Network Camera Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsFocus, zoom, and fan Remote focus and zoom doTechnical Specifications Technical SpecificationsPower Function/group Specifications Network SecurityAlarm actions ConnectorsPerformance Considerations M3.2
Related manuals
Manual 64 pages 7.22 Kb

P3363-VE specifications

Axis Communications P3363-VE is an advanced network camera specifically designed for outdoor surveillance applications. Renowned for its superior imaging capabilities and robust construction, the P3363-VE is a popular choice among professionals in security and surveillance sectors. This camera is engineered to perform reliably in challenging environments, making it suitable for a wide range of applications, including city surveillance, transportation hubs, and critical infrastructure protection.

One of the key features of the P3363-VE is its 3-megapixel resolution, which provides high-definition video quality with exceptional clarity. This enables the camera to capture detailed images even in low-light conditions, ensuring that critical incidents can be monitored without compromise. The camera is equipped with Automatic Day/Night functionality, allowing it to adapt seamlessly to varying light conditions, ensuring optimal performance around the clock.

The P3363-VE incorporates Axis' innovative Artpec-4 chip, which enhances image processing capabilities. This technology not only improves the camera’s ability to capture clear and sharp images in real-time but also facilitates advanced analytics. With features such as motion detection and video tampering alarms, the camera can intelligently monitor for unusual activity and send timely alerts.

Another significant feature of the P3363-VE is its weatherproof design, certified to IP66 and NEMA 4X standards. This robust construction allows the camera to operate effectively in harsh weather conditions, protecting it against rain, dust, and extreme temperatures. Additionally, the camera’s rugged housing is resistant to vandalism, ensuring that it retains its functionality in high-risk environments.

For versatility in installation, the P3363-VE supports Power over Ethernet (PoE), which simplifies the setup process by requiring only a single cable for both power and data transmission. This not only reduces installation costs but also enhances the flexibility of camera placement.

The P3363-VE is compatible with a range of video management software, making it easy to integrate into existing systems. Moreover, its support for H.264 and Motion JPEG ensures efficient video compression without compromising quality, allowing for reduced bandwidth and storage requirements.

In summary, the Axis Communications P3363-VE stands out due to its combination of high-resolution imaging, advanced processing capabilities, and rugged, weather-resistant design. These features make it an excellent choice for organizations seeking reliable outdoor surveillance solutions. Whether for protecting property or enhancing public safety, the P3363-VE camera provides the performance needed in today’s demanding security landscape.
Top Page Image Contents