Axis Communications p3344 Axis Media Control viewer toolbar, PTZ Controls, AMC Audio controls

Page 11

AXIS P3344 Fixed Dome Network Camera

Accessing the product

Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio clip and click the Play button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 13 for more information. The toolbar displays the following buttons:

The Play button connects to the Axis product and starts playing a media stream.

The Stop button stops the media stream.

The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified in the AMC Control Panel.

Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can be specified in the AMC Control Panel.

AMC Audio controls

AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when audio is enabled.

Speaker button — Click to turn the speakers on or off.

Microphone button – Click to mute or unmute the microphone. In Simplex - Network Camera speaker only mode, click this button to stop sending audio to the product.

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured from the Audio tab in the AMC Control panel:

•Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

•Toggle mode: Click once to switch between talking and listening.

Simplex – Network Camera speaker only mode

To send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audio transmission.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under System Options > Security > Users.

Note

These controls are available if digital PTZ is enabled in the selected view area, see View Area, on page 20.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Axis P3344 Fixed Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P3344 Fixed Dome Network Camera Table of ContentsPerformance considerations Hardware overview ConnectorsHardware overview GND Function Pin SpecificationsColor Indication LED indicatorsMaintenance Access from a browser Accessing the productAccessing the product Click Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedControls on the Live View Live ViewAMC Audio controls Axis Media Control viewer toolbarPTZ Controls Axis P3344 Fixed Dome Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsAlternative methods of accessing the video stream Accessing audio streams Basic Setup Setting up the productSetting up the product Image Video and AudioVideo and Audio Video StreamImage Appearance Camera SettingsStream Profiles 264Wide Dynamic Range Exposure SettingsIris adjustment White balanceOverlay image View AreaOverlay Privacy MaskGo to Video & Audio Focus & Zoom Audio SettingsFocus & Zoom Audio ChannelsG711 G726 Audio InputAudio Output Audio Clips Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsGuard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detectionGo to Detectors Audio Detection Default valuesAudio detection Recommended valuesApplications ApplicationsConvert Event Types to Action Rules Setting Up an Action RuleEvents EventsRecurrences RecipientsSchedules Axis P3344 Fixed Dome Network Camera Continuous recording RecordingsRecordings Recording ListAxis P3344 Fixed Dome Network Camera Users System OptionsSystem Options SecurityAudio Support Date & TimeIeee IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewPlain Config ScriptingFile Upload Reset to factory default settings Checking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Status and Network indicator LEDs are flashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format No images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Technical SpecificationsSupported Installation aidsFunction/group Specifications Audio Audio streaming Input/output Network SecurityPerformance considerations Axis P3344 Fixed Dome Network Camera M1.9

p3344 specifications

Axis Communications, a leading manufacturer of IP surveillance solutions, has developed the P3344 series of network cameras, designed to meet the growing demand for advanced security applications across various environments. The P3344 series is known for its high-performance capabilities, exceptional video quality, and a range of features that cater to both indoor and outdoor surveillance needs.

One of the standout features of the Axis P3344 cameras is their impressive video resolution capabilities, offering high-definition image quality that ensures clear and detailed footage. With resolutions reaching up to 1.3 megapixels, these cameras provide crystal-clear images even in challenging lighting conditions, thanks to the incorporation of advanced day/night functionality. The automatic switching between color mode during the day and monochrome mode at night enhances visibility, making them ideal for 24/7 monitoring in various settings.

The P3344 series utilizes progressive scan technology, which is essential for capturing fast-moving subjects without motion blur, ensuring smooth and clear video playback. This feature is particularly crucial in environments like retail spaces or public areas where swift actions need to be accurately recorded. Furthermore, Axis's proprietary Lightfinder technology allows these cameras to deliver color images in low-light situations, further expanding their range of operational capabilities.

Another key characteristic of the P3344 series is its flexibility in installation. The cameras come with a user-friendly design, allowing for easy mounting and integration into existing security systems. They support Power over Ethernet (PoE), which simplifies installation by requiring only one cable for power and data transmission, reducing the complexity of cabling during setup.

Moreover, Axis Communications emphasizes advanced security features in the P3344 series, including Motion Detection, Audio Detection, and built-in tampering alarms. These features not only enhance the camera's effectiveness in monitoring suspicious activities but also provide operational alerts to security personnel. The cameras are equipped with Axis's Zipstream technology, a smart compression technology that optimizes bandwidth and storage usage, allowing for high-quality video streaming while minimizing data consumption.

In summary, the Axis P3344 series exemplifies the perfect blend of quality, performance, and versatility in surveillance technology. With outstanding video quality, intelligent features, and ease of installation, it stands as an excellent choice for businesses and institutions seeking reliable security solutions. The P3344 series showcases Axis Communications' commitment to delivering innovative products that adapt to the evolving needs of the security landscape.
Top Page Image Contents