Axis Communications p3344 user manual Focus & Zoom, Audio Settings, Audio Channels

Page 21

AXIS P3344 Fixed Dome Network Camera

Video and Audio

Focus & Zoom

Focus and zoom should only be configured when installing or reinstalling the product. For installation instructions, refer to the product’s Installation Guide.

To set focus and zoom:

1.Install the camera as described in the Installation Guide.

2.Go to Video & Audio > Focus & Zoom.

3.On the Basic tab, set the zoom level using the slider. The buttons < and > move the zoom position one step in either direction. The buttons << and >> move the zoom position in multiple steps in either direction.

4.Click Perform auto focus to focus the camera automatically.

5.If more adjustments are needed, go to the Advanced tab.

Note

Changing the zoom level moves the focus position. Focus should always be adjusted after changing the zoom.

Movements in front of the camera should be avoided during automatic focusing.

The Pixel counter shows the number of pixels in an area of the image and can be used to ensure that the size of the image fulfills certain requirements, for example for face recognition. Use the mouse to move and resize the pixel counter, or enter the number of pixels in the Width and Height fields and click Apply.

On the Advanced tab, focus can be adjusted manually:

1.Click Open iris to open the iris to its maximum position. This gives the smallest depth of field and provides the best conditions for focusing.

2.Focus is set in the Focus window. Use the mouse to move and resize the focus window.

3.Set the zoom level using the slider and click Perform auto focus to focus the camera automatically.

4.Click in the Focus position bar to focus on a desired location. The buttons < and > move the focus position one step in either direction. The buttons << and >> move the focus position in multiple steps in either direction.

5.When satisfied, click Enable iris to enable the iris.

Audio Settings

The audio functionality for each video stream is enabled under Video & Audio > Video Stream > Audio.

Audio Channels

Select the type of audio transmission from the Audio mode: drop-down list (Video & Audio> Audio Settings). The different types are:

Full duplex - Simultaneous two-way audio allowing you to transmit and receive audio (talk and listen) at the same time. There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.

Half-duplex - Audio can be transmitted in both directions between the Axis product and the client computer, but only in one direction at a time. You must actively receive sound using the Talk/Listen button visible in the Live View page (see AXIS Media Control viewer toolbar). In Push-To-Talkmode, click and hold the button to speak and release it when done. In Toggle mode, click once to switch between speaking and listening. The Talk/Listen mode is configured from the Audio tab in the AMC control panel (see AXIS Media Control on page 13).

Simplex - Network Camera speaker only - Audio is transmitted from the client to the Axis product and played by the speaker connected to the product. To send audio, the Talk and Microphone buttons in the AMC toolbar must both be enabled. Click either button to stop audio transmission.

21

Image 21
Contents Axis P3344 Fixed Dome Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis P3344 Fixed Dome Network Camera Table of ContentsPerformance considerations Connectors Hardware overviewHardware overview GND Function Pin SpecificationsLED indicators MaintenanceColor Indication Accessing the product Accessing the productAccess from a browser Set the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ ControlsAMC Audio controls Axis P3344 Fixed Dome Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Accessing audio streams Setting up the product Setting up the productBasic Setup Video and Audio Video and AudioVideo Stream ImageStream Profiles Camera Settings264 Image AppearanceIris adjustment Exposure SettingsWhite balance Wide Dynamic RangeOverlay View AreaPrivacy Mask Overlay imageFocus & Zoom Audio SettingsAudio Channels Go to Video & Audio Focus & ZoomAudio Input Audio OutputG711 G726 Audio Clips Default viewer for browsers Live View ConfigLive View Config User Defined Links Viewer SettingsOutput Buttons Browser Viewer DescriptionPTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedDetectors DetectorsCamera Tampering Motion DetectionMotion detection parameters Set up motion detectionAudio detection Default valuesRecommended values Go to Detectors Audio DetectionApplications ApplicationsEvents Setting Up an Action RuleEvents Convert Event Types to Action RulesRecipients SchedulesRecurrences Axis P3344 Fixed Dome Network Camera Recordings RecordingsRecording List Continuous recordingAxis P3344 Fixed Dome Network Camera System Options System OptionsSecurity UsersDate & Time IeeeAudio Support Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourPorts & Devices MaintenanceNetwork Share PortsSupport Overview SupportSystem Overview Logs & ReportsScripting File UploadPlain Config Reset to factory default settings Troubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera Settings Video and image problems, generalProblems uploading files No images displayed on webStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Technical SpecificationsFunction/group Specifications Audio Audio streaming Installation aidsInput/output Network Security SupportedPerformance considerations Axis P3344 Fixed Dome Network Camera M1.9

p3344 specifications

Axis Communications, a leading manufacturer of IP surveillance solutions, has developed the P3344 series of network cameras, designed to meet the growing demand for advanced security applications across various environments. The P3344 series is known for its high-performance capabilities, exceptional video quality, and a range of features that cater to both indoor and outdoor surveillance needs.

One of the standout features of the Axis P3344 cameras is their impressive video resolution capabilities, offering high-definition image quality that ensures clear and detailed footage. With resolutions reaching up to 1.3 megapixels, these cameras provide crystal-clear images even in challenging lighting conditions, thanks to the incorporation of advanced day/night functionality. The automatic switching between color mode during the day and monochrome mode at night enhances visibility, making them ideal for 24/7 monitoring in various settings.

The P3344 series utilizes progressive scan technology, which is essential for capturing fast-moving subjects without motion blur, ensuring smooth and clear video playback. This feature is particularly crucial in environments like retail spaces or public areas where swift actions need to be accurately recorded. Furthermore, Axis's proprietary Lightfinder technology allows these cameras to deliver color images in low-light situations, further expanding their range of operational capabilities.

Another key characteristic of the P3344 series is its flexibility in installation. The cameras come with a user-friendly design, allowing for easy mounting and integration into existing security systems. They support Power over Ethernet (PoE), which simplifies installation by requiring only one cable for power and data transmission, reducing the complexity of cabling during setup.

Moreover, Axis Communications emphasizes advanced security features in the P3344 series, including Motion Detection, Audio Detection, and built-in tampering alarms. These features not only enhance the camera's effectiveness in monitoring suspicious activities but also provide operational alerts to security personnel. The cameras are equipped with Axis's Zipstream technology, a smart compression technology that optimizes bandwidth and storage usage, allowing for high-quality video streaming while minimizing data consumption.

In summary, the Axis P3344 series exemplifies the perfect blend of quality, performance, and versatility in surveillance technology. With outstanding video quality, intelligent features, and ease of installation, it stands as an excellent choice for businesses and institutions seeking reliable security solutions. The P3344 series showcases Axis Communications' commitment to delivering innovative products that adapt to the evolving needs of the security landscape.