Axis Communications p3344 user manual Storage, UPnPTM, RTP/H.264, Bonjour, SD card

Page 43

AXIS P3344 Fixed Dome Network Camera

System Options

The following traps are available:

•Cold start

•Warm start

•Link up

•Authentication failed

SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see HTTPS, on page 37. To enable SNMP v3, check the box and provide the initial user password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to factory default settings, on page 47.

UPnPTM

The Axis product includes support for UPnPTM. UPnPTM is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

UPnPTM can be disabled under System Options > Network > UPnPTM.

RTP/H.264

The RTP port range and multicast settings are configured under System Options > Network > RTP.

The RTP port range defines the range of ports from which the video/audio ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.

Select Always Multicast Video and/or Always Multicast Video to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

SD card

The SD/SDHC memory card (not included) is managed on the System Options > Storage page. Click SD card to open Storage Management.

Mounting is done automatically when the card is inserted or when the product boots. SD cards are normally preformatted when purchased, but if needed, click Format to format the card.

Format an SD card so that it can be written to one of two available options — VFAT and ext4. During the formatting any previous data stored on the disk will be lost. The recommended format is ext4, due to its resilience against data loss if the card is ejected or if there is abrupt power loss. A third-party ext4 driver or application is also needed to access the file system from Windows.

Note that most SD cards are pre-formatted with vFAT when purchased. The Check Disk option is used to check for errors on the SD card and only works for the file system ext4. The Repair option repairs the SD card of errors in the file system ext4. For vFAT file system use a card reader or PC to perform card maintenance.

Note

To prevent corruption of recordings, the SD card should always be unmounted before removal.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Axis P3344 Fixed Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P3344 Fixed Dome Network Camera Table of ContentsPerformance considerations Hardware overview ConnectorsHardware overview GND Function Pin SpecificationsMaintenance LED indicatorsColor Indication Accessing the product Accessing the productAccess from a browser Click Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedControls on the Live View Live ViewPTZ Controls Axis Media Control viewer toolbarAMC Audio controls Axis P3344 Fixed Dome Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsAlternative methods of accessing the video stream Accessing audio streams Setting up the product Setting up the productBasic Setup Image Video and AudioVideo and Audio Video StreamImage Appearance Camera SettingsStream Profiles 264Wide Dynamic Range Exposure SettingsIris adjustment White balanceOverlay image View AreaOverlay Privacy MaskGo to Video & Audio Focus & Zoom Audio SettingsFocus & Zoom Audio ChannelsAudio Output Audio InputG711 G726 Audio Clips Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsGuard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detectionGo to Detectors Audio Detection Default valuesAudio detection Recommended valuesApplications ApplicationsConvert Event Types to Action Rules Setting Up an Action RuleEvents EventsSchedules RecipientsRecurrences Axis P3344 Fixed Dome Network Camera Continuous recording RecordingsRecordings Recording ListAxis P3344 Fixed Dome Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewFile Upload ScriptingPlain Config Reset to factory default settings Checking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProblems setting the IP address Symptoms, possible causes and remedial actionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly No images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Technical SpecificationsSupported Installation aidsFunction/group Specifications Audio Audio streaming Input/output Network SecurityPerformance considerations Axis P3344 Fixed Dome Network Camera M1.9

p3344 specifications

Axis Communications, a leading manufacturer of IP surveillance solutions, has developed the P3344 series of network cameras, designed to meet the growing demand for advanced security applications across various environments. The P3344 series is known for its high-performance capabilities, exceptional video quality, and a range of features that cater to both indoor and outdoor surveillance needs.

One of the standout features of the Axis P3344 cameras is their impressive video resolution capabilities, offering high-definition image quality that ensures clear and detailed footage. With resolutions reaching up to 1.3 megapixels, these cameras provide crystal-clear images even in challenging lighting conditions, thanks to the incorporation of advanced day/night functionality. The automatic switching between color mode during the day and monochrome mode at night enhances visibility, making them ideal for 24/7 monitoring in various settings.

The P3344 series utilizes progressive scan technology, which is essential for capturing fast-moving subjects without motion blur, ensuring smooth and clear video playback. This feature is particularly crucial in environments like retail spaces or public areas where swift actions need to be accurately recorded. Furthermore, Axis's proprietary Lightfinder technology allows these cameras to deliver color images in low-light situations, further expanding their range of operational capabilities.

Another key characteristic of the P3344 series is its flexibility in installation. The cameras come with a user-friendly design, allowing for easy mounting and integration into existing security systems. They support Power over Ethernet (PoE), which simplifies installation by requiring only one cable for power and data transmission, reducing the complexity of cabling during setup.

Moreover, Axis Communications emphasizes advanced security features in the P3344 series, including Motion Detection, Audio Detection, and built-in tampering alarms. These features not only enhance the camera's effectiveness in monitoring suspicious activities but also provide operational alerts to security personnel. The cameras are equipped with Axis's Zipstream technology, a smart compression technology that optimizes bandwidth and storage usage, allowing for high-quality video streaming while minimizing data consumption.

In summary, the Axis P3344 series exemplifies the perfect blend of quality, performance, and versatility in surveillance technology. With outstanding video quality, intelligent features, and ease of installation, it stands as an excellent choice for businesses and institutions seeking reliable security solutions. The P3344 series showcases Axis Communications' commitment to delivering innovative products that adapt to the evolving needs of the security landscape.
Top Page Image Contents