Axis Communications p3344 Network, Basic TCP/IP Settings, IPv4 Address Configuration, ARP/Ping

Page 39

AXIS P3344 Fixed Dome Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 40.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 40.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server, which when allows you to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 47) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Axis P3344 Fixed Dome Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis P3344 Fixed Dome Network Camera Table of ContentsPerformance considerations Connectors Hardware overviewHardware overview GND Function Pin SpecificationsLED indicators MaintenanceColor Indication Accessing the product Accessing the productAccess from a browser Click Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ ControlsAMC Audio controls Axis P3344 Fixed Dome Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsAlternative methods of accessing the video stream Accessing audio streams Setting up the product Setting up the productBasic Setup Image Video and AudioVideo and Audio Video StreamImage Appearance Camera SettingsStream Profiles 264Wide Dynamic Range Exposure SettingsIris adjustment White balanceOverlay image View AreaOverlay Privacy MaskGo to Video & Audio Focus & Zoom Audio SettingsFocus & Zoom Audio ChannelsAudio Input Audio OutputG711 G726 Audio Clips Default viewer for browsers Live View ConfigLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Output ButtonsGuard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detectionGo to Detectors Audio Detection Default valuesAudio detection Recommended valuesApplications ApplicationsConvert Event Types to Action Rules Setting Up an Action RuleEvents EventsRecipients SchedulesRecurrences Axis P3344 Fixed Dome Network Camera Continuous recording RecordingsRecordings Recording ListAxis P3344 Fixed Dome Network Camera Users System OptionsSystem Options SecurityDate & Time IeeeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Ports MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewScripting File UploadPlain Config Reset to factory default settings Checking the firmware TroubleshootingTroubleshooting Emergency recovery procedureSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly No images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Technical SpecificationsSupported Installation aidsFunction/group Specifications Audio Audio streaming Input/output Network SecurityPerformance considerations Axis P3344 Fixed Dome Network Camera M1.9

p3344 specifications

Axis Communications, a leading manufacturer of IP surveillance solutions, has developed the P3344 series of network cameras, designed to meet the growing demand for advanced security applications across various environments. The P3344 series is known for its high-performance capabilities, exceptional video quality, and a range of features that cater to both indoor and outdoor surveillance needs.

One of the standout features of the Axis P3344 cameras is their impressive video resolution capabilities, offering high-definition image quality that ensures clear and detailed footage. With resolutions reaching up to 1.3 megapixels, these cameras provide crystal-clear images even in challenging lighting conditions, thanks to the incorporation of advanced day/night functionality. The automatic switching between color mode during the day and monochrome mode at night enhances visibility, making them ideal for 24/7 monitoring in various settings.

The P3344 series utilizes progressive scan technology, which is essential for capturing fast-moving subjects without motion blur, ensuring smooth and clear video playback. This feature is particularly crucial in environments like retail spaces or public areas where swift actions need to be accurately recorded. Furthermore, Axis's proprietary Lightfinder technology allows these cameras to deliver color images in low-light situations, further expanding their range of operational capabilities.

Another key characteristic of the P3344 series is its flexibility in installation. The cameras come with a user-friendly design, allowing for easy mounting and integration into existing security systems. They support Power over Ethernet (PoE), which simplifies installation by requiring only one cable for power and data transmission, reducing the complexity of cabling during setup.

Moreover, Axis Communications emphasizes advanced security features in the P3344 series, including Motion Detection, Audio Detection, and built-in tampering alarms. These features not only enhance the camera's effectiveness in monitoring suspicious activities but also provide operational alerts to security personnel. The cameras are equipped with Axis's Zipstream technology, a smart compression technology that optimizes bandwidth and storage usage, allowing for high-quality video streaming while minimizing data consumption.

In summary, the Axis P3344 series exemplifies the perfect blend of quality, performance, and versatility in surveillance technology. With outstanding video quality, intelligent features, and ease of installation, it stands as an excellent choice for businesses and institutions seeking reliable security solutions. The P3344 series showcases Axis Communications' commitment to delivering innovative products that adapt to the evolving needs of the security landscape.
Top Page Image Contents