Axis Communications Q6045-C PTZ IPv4 Address Configuration, IPv6 Address Configuration, ARP/Ping

Page 47

AXIS Q6045-C PTZ Dome Network Camera

System Options

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 55) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The product’s IP address can be assigned using ARP and Ping. For instructions, see Assign IP Address Using ARP/Ping on page 47.

The ARP/Ping service is enabled by default but is automatically disabled two minutes after the product is started, or as soon as an IP address is assigned. To re-assign IP address using ARP/Ping, the product must be restarted to enable ARP/Ping for an additional two minutes.

To disable the service, go to System Options > Network > TCP/IP > Basic and clear the option Enable ARP/Ping setting of IP address.

Pinging the product is still possible when the service is disabled.

Assign IP Address Using ARP/Ping

The product's IP address can be assigned using ARP/Ping. The command must be issued within 2 minutes of connecting power.

1.Acquire a free static IP address on the same network segment as the computer.

2.Locate the serial number (S/N) on the product label.

3.Open a command prompt and enter the following commands:

Linux/Unix syntax

arp -s <IP address> <serial number> temp ping -s 408 <IP address>

Linux/Unix example

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125

Windows syntax (this may require that you run the command prompt as an administrator)

arp -s <IP address> <serial number> ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Axis Q6045-C PTZ Dome Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q6045-C PTZ Dome Network Camera Table of ContentsMulti-Connector Cable Troubleshooting Camera Connectors and ButtonsFor technical specifications, see Hardware OverviewSD Card Slot LED IndicatorsMulti-connector Power ButtonMedia Converter Switch Connectors Media Converter SwitchConnector internal 2-pin I/O terminal block Network Connector Dip SwitchesDip switch position Description Media Converter Switch LED IndicatorsSet the Root Password Access the ProductAccess from a Browser Access from the InternetClick Use Https Go to Setup EventsLive View Controls on the Live ViewTo show the manual trigger buttons in the Live View Axis Media Control viewer toolbarPTZ Controls Axis Q6045-C PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis Q6045-C PTZ Dome Network Camera Basic Setup Set Up the ProductPixel Counter Click Save to apply the new settingsVideo Video Stream264 Stream ProfilesWhite Balance Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Events Action Rules Use Overlay Text in an Action RulePrivacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsGatekeeper Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomMax Limits ConfigurationAutotracking Exclude AreasTo add a recorded tour Guard TourTour Recording To add a guard tourControls Osdi ZonesAdvanced LimitsControl Queue Operator Same as administrator but with lower priorityMotion Detection Set Up Motion Detection WindowsDetectors Shock DetectionEnter/Exit Detector Object RemovedObject Counter Fence DetectorApplication Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q6045-C PTZ Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesTriggers Recipient Types Add RecipientsActions Recipient Use with action Set Up Email RecipientsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Format SD Card StorageSD Card Mount and Unmount SD CardPorts MaintenancePorts & Devices Network ShareLogs & Reports SupportSupport Overview System OverviewFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis Q6045-C PTZ Dome Network Camera Green/white Ethernet receiving Multi-Connector CableFunction Pin wire Specifications Activated, floating unconnected when Drain, 100 mACheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserKey frames Problems with streaming H.264Video and image problems, general Video Camera SettingsRe-mount the storage device Storage and disk management problemsMedia converter switch Storage disruptionTechnical Specifications Power Function/group Specifications System ApplicationInstallation aid MaintenanceIncluded Function/group SpecificationsWeight AccessoriesExternal Connectors ConnectorsCamera Connectors Separately DC, min 75 W DC output Power out DC, 50 mADC input Max load = 7 aM4.2

Q6045-C PTZ specifications

The Axis Communications Q6045-C PTZ camera is a state-of-the-art surveillance solution designed for demanding environments. Known for its exceptional performance, this camera combines advanced technology with robust features, making it an ideal choice for various applications, including city surveillance, traffic monitoring, and large infrastructure protection.

One of the key features of the Q6045-C is its high-quality imaging capabilities. Equipped with a 2 MP sensor, it offers stunning video resolution at 1080p, delivering sharp and clear images even in challenging lighting conditions. This camera has a wide dynamic range (WDR) technology, ensuring that both bright and dark areas are captured with precision, making it highly effective in situations with varying light conditions.

The Q6045-C also boasts advanced pan-tilt-zoom (PTZ) functionality, allowing operators to cover large areas with great detail. It offers a 360-degree continuous pan and a tilt range of up to 20 degrees, coupled with a powerful 30x optical zoom. This flexibility enables security personnel to monitor specific areas and zoom in on points of interest without losing image quality, ensuring that no detail goes unnoticed.

Another notable technological advancement of this camera is its built-in Axis Zipstream technology. This feature optimizes bandwidth and storage efficiency by dynamically adjusting the compression of video streams while maintaining essential details. This allows users to save on storage costs and simplifies bandwidth management, making the Q6045-C an economical choice for long-term surveillance.

The Q6045-C is built to withstand harsh environments, featuring an IP66 rating for weather resistance and a robust design that protects against dust and water ingress. This durability makes it suitable for outdoor use in various climates.

Additionally, the camera is equipped with advanced cybersecurity features to safeguard against unauthorized access and tampering. With Axis Communications’ commitment to security, users can rest assured that their surveillance data remains protected.

In summary, the Axis Communications Q6045-C PTZ camera is a versatile and robust surveillance solution featuring high-resolution imaging, advanced PTZ capabilities, and enhanced durability. Its smart technologies, including Zipstream and cybersecurity measures, make it a reliable choice for ensuring safety and security in a wide range of applications.
Top Page Image Contents