Axis Communications P3365-V user manual Audio Input

Page 26

AXIS P3365-V Fixed Dome Network Camera

Video and Audio

Audio Input

An external microphone or a line source can be connected to the Audio-in connector. Configure the audio input settings under Video & Audio > Audio Settings.

Note

The internal microphone is used by default; the external microphone is used when connected. It is possible to disable the internal microphone by connecting a plug to the mic input.

Note

When used in an outdoor enclosure, the internal microphone on this Axis product cannot be used.

Select Microphone to use an external microphone or Line to use a Line in device, e.g. an audio mixer for multiple microphones or a microphone with a built-in amplifier, as audio source.

Select the +30 dB microphone boost option to amplify the signal of the external microphone connected to the Axis product. This option is not available when the Line source is selected

To use a professional microphone requiring 48 V phantom power, you need an external power supply and a balanced-unbalanced converter (audio transformer) in between.

The Microphone power option provides DC power for an external microphone. Microphone power should only be used with microphones that have no battery and when using the internal microphone. This setting should not be enabled when using a dynamic or battery powered microphone. Microphone power will not harm the microphone; if you are uncertain, try switching it off and on. To use a professional microphone requiring 48 V phantom power, you need an external power supply and a balanced-unbalanced converter (audio transformer) in between.

Use the Input gain to control the volume (dB Full Scale) of the audio input. If the sound is too low, choose a higher dB, to amplify the sound. If the sound is too high, choose a lower dB. The Level bar gives a visual representation of the audio signal level in dB relative to the full-scale input level.

•Green — the signal is at a good level.

•Yellow — the signal is becoming distorted.

•Red — the signal is distorted.

Use the Encoding option to select digital audio encoding format.

•AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely used codec. If achieving the best possible audio quality is a priority, AAC is the recommended codec to use. An AAC license is included in the Axis product.

•G711 is an unlicensed standard codec that is useful when integrating audio into a VoIP system

•G726 is an unlicensed speech codec that is most commonly used within the security industry.

Note

If recording audio to edge storage, such as an SD card or network share, use AAC encoding.

The Sample rate defines the number of times per second the sound is sampled. A higher sample rate will provide better audio quality, but also requires a greater bandwidth.

Set the required Bit rate depending on the selected encoding. A higher bit rate will give better audio quality. A lower bit rate may have latency or delay, but will require less bandwidth.

For more information about these settings, please see the online help .

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Axis P3365-V Fixed Dome Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3365-V Fixed Dome Network CameraTechnical Specifications ConnectorsDimension Connectors and ButtonsNetwork Connector WeightSD Card Slot ConnectorAudio Connector Control ButtonStatus LED Indication LED IndicatorsPower LED Indication Network LED IndicationStart a browser Chrome, Internet Explorer, Firefox, Safari Access the ProductAccess from a Browser Click Use Https Access from the InternetSet the Root Password Controls on the Live View Set Power Line FrequencyLive View Manual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewHalf-duplex mode PTZ ControlsAxis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupPixel Counter Set Up Video StreamsVideo and Audio ImageClick Save to apply the new settings 264Camera Settings Stream ProfilesSet Shutter to Iris adjustmentShutter & Gain Day/NightOverlay Select an Aspect ratio and a Video stream resolutionView Area Go to Video & Audio View AreaOverlay Image Go to Video & Audio Overlay ImageUse Overlay Text in an Action Rule Privacy MaskFocus & Zoom Go to Events Action RulesAudio Modes Set Up AudioWhen satisfied, click Enable iris to enable the iris Go to Video & Audio Focus & ZoomAudio Input Audio Clips Audio OutputViewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onGuard Tour Preset PositionsPTZ Pan Tilt Zoom AdvancedOperator Same as administrator but with lower priority Control QueueMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionApplications Install ApplicationGo to Setup Applications Application LicensesAxis P3365-V Fixed Dome Network Camera Add Recipients Set Up Action RulesEvents Go to Events Action Rules and click AddCreate Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click AddAxis P3365-V Fixed Dome Network Camera Continuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterGo to System Options Security Ieee IeeeCertificates Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM SD Card StorageBonjour Network SharePorts MaintenancePorts & Devices Port StatusSystem Overview SupportSupport Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Firmware To upgrade the product’s firmware TroubleshootingUpgrade the Firmware Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsEmergency Recovery Procedure Product cannot be accessed from a browserBasic Product is accessible locally but not externallyProblems with streaming H.264 Setup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsRe-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click MountTechnical Specifications Maintenance General Casing Function/group Specifications Network SecurityInstallation aids PowerConnectors Audio Output Performance ConsiderationsAudio Input Axis P3365-V Fixed Dome Network Camera M3.2

P3365-V specifications

Axis Communications has established itself as a leader in the field of network video surveillance, and among its standout models is the Axis P3365-V network camera. This camera is designed for indoor use, specifically targeting professional video surveillance applications that demand high-quality imaging and advanced features.

The P3365-V offers a 1080p HDTV resolution, providing stunning image clarity that is crucial for identifying individuals and objects in various environments. With a frame rate of up to 30 frames per second, it ensures smooth video playback, making it suitable for scenarios where detail matters, such as retail spaces and transportation hubs.

One of the standout features of the P3365-V is its wide dynamic range (WDR) technology, which allows the camera to capture scenes with challenging lighting conditions. This is particularly beneficial in environments where both dark and bright areas exist, enabling the camera to produce well-balanced images that maintain clarity in highlights and shadows.

Moreover, the Axis P3365-V is equipped with Axis' Zipstream technology, which optimizes bandwidth and storage use without compromising video quality. This intelligent compression method significantly reduces data rates, making it an ideal choice for organizations concerned about storage expenses while still requiring high-resolution video.

The camera also boasts a robust design, featuring a vandal-resistant casing that ensures durability and reliability in various settings. With its IP66 rating, the P3365-V is protected against dust and rain, making it suitable for installation in challenging indoor environments.

In terms of installation and integration, the P3365-V is designed for flexibility, offering various mounting options that allow for easy placement in a variety of configurations. Its Power over Ethernet (PoE) capability simplifies installation by allowing both power and data to be transmitted over a single cable.

In summary, the Axis P3365-V network camera is a highly versatile and reliable surveillance solution, combining high-definition imaging, advanced video compression, and durable design. With technological features such as WDR and Zipstream, it caters to a range of surveillance needs while ensuring that organizations can maintain a keen eye on their premises. Whether deployed in retail, offices, or transportation, the P3365-V stands out as an exemplary choice for modern security solutions.
Top Page Image Contents