Axis Communications P3365-V user manual Ports & Devices, Maintenance, Port Status

Page 52

AXIS P3365-V Fixed Dome Network Camera

System Options

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

Ports & Devices

I/O Ports

The Axis product provides one input port and one output port for connection of external devices. For information about how to connect external devices, see Connectors on page 62.

The I/O ports are configured under System Options > Ports & Devices > I/O Ports. The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.

Port Status

The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Note

A restart clears all entries in the Server Report.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•the IEEE 802.1X settings

•the focus position

•uploaded applications are kept but must be restarted

Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings on page 54.

To reset the optics, click Calibrate under System Options > Maintenance > Optics. This may be necessary in situations where the optics has lost its calibration during transport or has been exposed to extreme vibrations. If necessary configure focus and zoom again (see Basic Setup on page 17).

To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours. This can be useful for identifying the product among other products installed in the same location.

For information about firmware upgrade, see Upgrade the Firmware on page 55.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Axis P3365-V Fixed Dome Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3365-V Fixed Dome Network CameraTechnical Specifications ConnectorsConnectors and Buttons Network ConnectorDimension WeightConnector Audio ConnectorSD Card Slot Control ButtonLED Indicators Power LED IndicationStatus LED Indication Network LED IndicationAccess from a Browser Access the ProductStart a browser Chrome, Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Use Https Live View Set Power Line FrequencyControls on the Live View Go to Setup Events Axis Media Control viewer toolbarManual Trigger To show the manual trigger buttons in the Live ViewHalf-duplex mode PTZ ControlsMedia Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupSet Up Video Streams Video and AudioPixel Counter ImageClick Save to apply the new settings 264Camera Settings Stream ProfilesIris adjustment Shutter & GainSet Shutter to Day/NightSelect an Aspect ratio and a Video stream resolution View AreaOverlay Go to Video & Audio View AreaOverlay Image Go to Video & Audio Overlay ImagePrivacy Mask Focus & ZoomUse Overlay Text in an Action Rule Go to Events Action RulesSet Up Audio When satisfied, click Enable iris to enable the irisAudio Modes Go to Video & Audio Focus & ZoomAudio Input Audio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions PTZ Pan Tilt ZoomGuard Tour AdvancedOperator Same as administrator but with lower priority Control QueueDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionInstall Application Go to Setup ApplicationsApplications Application LicensesAxis P3365-V Fixed Dome Network Camera Set Up Action Rules EventsAdd Recipients Go to Events Action Rules and click AddSet Up Recurrences Set Up Email RecipientsCreate Schedules Go to Events Schedules and click AddAxis P3365-V Fixed Dome Network Camera Recordings Recording ListContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages System Options SecurityUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Go to Setup System Options Security Certificates Click Install certificate and upload the certificateDate & Time Audio SupportBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Storage BonjourSD Card Network ShareMaintenance Ports & DevicesPorts Port StatusSupport Support OverviewSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsFile Upload Troubleshooting Upgrade the FirmwareFirmware To upgrade the product’s firmware Check the FirmwareSymptoms, Possible Causes and Remedial Actions Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserProblems with streaming H.264 Product is accessible locally but not externallyBasic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsStorage and disk management problems Storage disruptionRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Function/group Specifications Network Security Installation aidsMaintenance General Casing PowerConnectors Audio Input Performance ConsiderationsAudio Output Axis P3365-V Fixed Dome Network Camera M3.2

P3365-V specifications

Axis Communications has established itself as a leader in the field of network video surveillance, and among its standout models is the Axis P3365-V network camera. This camera is designed for indoor use, specifically targeting professional video surveillance applications that demand high-quality imaging and advanced features.

The P3365-V offers a 1080p HDTV resolution, providing stunning image clarity that is crucial for identifying individuals and objects in various environments. With a frame rate of up to 30 frames per second, it ensures smooth video playback, making it suitable for scenarios where detail matters, such as retail spaces and transportation hubs.

One of the standout features of the P3365-V is its wide dynamic range (WDR) technology, which allows the camera to capture scenes with challenging lighting conditions. This is particularly beneficial in environments where both dark and bright areas exist, enabling the camera to produce well-balanced images that maintain clarity in highlights and shadows.

Moreover, the Axis P3365-V is equipped with Axis' Zipstream technology, which optimizes bandwidth and storage use without compromising video quality. This intelligent compression method significantly reduces data rates, making it an ideal choice for organizations concerned about storage expenses while still requiring high-resolution video.

The camera also boasts a robust design, featuring a vandal-resistant casing that ensures durability and reliability in various settings. With its IP66 rating, the P3365-V is protected against dust and rain, making it suitable for installation in challenging indoor environments.

In terms of installation and integration, the P3365-V is designed for flexibility, offering various mounting options that allow for easy placement in a variety of configurations. Its Power over Ethernet (PoE) capability simplifies installation by allowing both power and data to be transmitted over a single cable.

In summary, the Axis P3365-V network camera is a highly versatile and reliable surveillance solution, combining high-definition imaging, advanced video compression, and durable design. With technological features such as WDR and Zipstream, it caters to a range of surveillance needs while ensuring that organizations can maintain a keen eye on their premises. Whether deployed in retail, offices, or transportation, the P3365-V stands out as an exemplary choice for modern security solutions.
Top Page Image Contents