Axis Communications P3365-V NTP Configuration, Host Name Configuration, Link-Local IPv4 Address

Page 48

AXIS P3365-V Fixed Dome Network Camera

System Options

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see HTTPS on page 43.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. With NAT traversal properly configured, all HTTP traffic to an external HTTP port in the NAT router is forwarded to the product.

NAT traversal is configured under System Options > Network > TCP/IP > Advanced.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Axis P3365-V Fixed Dome Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3365-V Fixed Dome Network CameraTechnical Specifications ConnectorsConnectors and Buttons Network ConnectorDimension WeightConnector Audio ConnectorSD Card Slot Control ButtonLED Indicators Power LED IndicationStatus LED Indication Network LED IndicationAccess the Product Access from a BrowserStart a browser Chrome, Internet Explorer, Firefox, Safari Access from the Internet Set the Root PasswordClick Use Https Set Power Line Frequency Live ViewControls on the Live View Go to Setup Events Axis Media Control viewer toolbarManual Trigger To show the manual trigger buttons in the Live ViewHalf-duplex mode PTZ ControlsHow to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupSet Up Video Streams Video and AudioPixel Counter ImageClick Save to apply the new settings 264Camera Settings Stream ProfilesIris adjustment Shutter & GainSet Shutter to Day/NightSelect an Aspect ratio and a Video stream resolution View AreaOverlay Go to Video & Audio View AreaOverlay Image Go to Video & Audio Overlay ImagePrivacy Mask Focus & ZoomUse Overlay Text in an Action Rule Go to Events Action RulesSet Up Audio When satisfied, click Enable iris to enable the irisAudio Modes Go to Video & Audio Focus & ZoomAudio Input Audio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions PTZ Pan Tilt ZoomGuard Tour AdvancedOperator Same as administrator but with lower priority Control QueueDetectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionInstall Application Go to Setup ApplicationsApplications Application LicensesAxis P3365-V Fixed Dome Network Camera Set Up Action Rules EventsAdd Recipients Go to Events Action Rules and click AddSet Up Recurrences Set Up Email RecipientsCreate Schedules Go to Events Schedules and click AddAxis P3365-V Fixed Dome Network Camera Recordings Recording ListContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Click Install certificate and upload the certificateDate & Time Audio SupportBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 Storage BonjourSD Card Network ShareMaintenance Ports & DevicesPorts Port StatusSupport Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Troubleshooting Upgrade the FirmwareFirmware To upgrade the product’s firmware Check the FirmwareSymptoms, Possible Causes and Remedial Actions Emergency Recovery ProcedureProblems setting the IP address Product cannot be accessed from a browserProduct is accessible locally but not externally Problems with streaming H.264Basic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings SettingsStorage and disk management problems Storage disruptionRe-mount the storage device Reformat the SD card and then click MountTechnical Specifications Function/group Specifications Network Security Installation aidsMaintenance General Casing PowerConnectors Performance Considerations Audio InputAudio Output Axis P3365-V Fixed Dome Network Camera M3.2

P3365-V specifications

Axis Communications has established itself as a leader in the field of network video surveillance, and among its standout models is the Axis P3365-V network camera. This camera is designed for indoor use, specifically targeting professional video surveillance applications that demand high-quality imaging and advanced features.

The P3365-V offers a 1080p HDTV resolution, providing stunning image clarity that is crucial for identifying individuals and objects in various environments. With a frame rate of up to 30 frames per second, it ensures smooth video playback, making it suitable for scenarios where detail matters, such as retail spaces and transportation hubs.

One of the standout features of the P3365-V is its wide dynamic range (WDR) technology, which allows the camera to capture scenes with challenging lighting conditions. This is particularly beneficial in environments where both dark and bright areas exist, enabling the camera to produce well-balanced images that maintain clarity in highlights and shadows.

Moreover, the Axis P3365-V is equipped with Axis' Zipstream technology, which optimizes bandwidth and storage use without compromising video quality. This intelligent compression method significantly reduces data rates, making it an ideal choice for organizations concerned about storage expenses while still requiring high-resolution video.

The camera also boasts a robust design, featuring a vandal-resistant casing that ensures durability and reliability in various settings. With its IP66 rating, the P3365-V is protected against dust and rain, making it suitable for installation in challenging indoor environments.

In terms of installation and integration, the P3365-V is designed for flexibility, offering various mounting options that allow for easy placement in a variety of configurations. Its Power over Ethernet (PoE) capability simplifies installation by allowing both power and data to be transmitted over a single cable.

In summary, the Axis P3365-V network camera is a highly versatile and reliable surveillance solution, combining high-definition imaging, advanced video compression, and durable design. With technological features such as WDR and Zipstream, it caters to a range of surveillance needs while ensuring that organizations can maintain a keen eye on their premises. Whether deployed in retail, offices, or transportation, the P3365-V stands out as an exemplary choice for modern security solutions.
Top Page Image Contents