Bosch Appliances EX36N instruction manual Number Description, Faceplate Removal

Page 11

Corner-mount No-grip Camera	Installation en 11

4.Ensure that the polycarbonate windows in the faceplate are not scratched.

Figure 3.1 Faceplate Removal

Number Description

1Faceplate

2Housing

3Tamper-resistant hex screws

Figure 3.2 below shows the interior layout of the EX36(N) camera assembly after the faceplate has been removed. Smaller details such as wiring and terminal blocks are omitted for clarity. Refer to the specific module sections for these details.

Bosch Security Systems, Inc.

Instruction Manual

F.01U.172.707 3.0 2011.02

Image 11

Contents EX36 Corner-mount No-grip Camera Page Table of Contents Important Safety Instructions SafetyCorner-mount No-grip Camera Safety en FCC Information Bosch Contact Information Unpacking Parts ListDescription User-Supplied Parts Faceplate Removal InstallationInstallation Step Initial PreparationsFaceplate Removal Number DescriptionLayout of Modules Input Power ConnectionsBoard Connections, LED Voltage Regulator Board VRB Mounting the Camera HousingMounting Holes EX36N Camera Housing Camera Directional Adjustment Power Adjustments LED Adjustments EX36N onlyLens Replacement Photocell Foam pad Camera Re-assemblyTechnical Information Troubleshooting CameraProblem Possible Solution Troubleshooting LEDsGeneral Specifications En Technical Information Corner-mount No-grip Camera Page Bosch Security Systems, Inc