Bosch Appliances instruction manual LED Adjustments EX36N only, Power Adjustments

Page 16

16 en Installation

Corner-mount No-grip Camera

 

 

3.6LED Adjustments (EX36N only)

If you must make adjustments to the LEDs, follow the steps below. Refer to Figure 3.7 below for more details.

Figure 3.7 LED Array Adjustments

Number Description

1LED Power Adjustment (VR1)

2Photocell On/Off Adjustment (VR2)

3.6.1Power Adjustments

If you must adjust the power, follow these steps:

1.Ensure that the unit is “ON.”

2.Remove the rear cover for access to the LRB.

3.Cover the photocell to turn on the LEDs. (850nm LEDs will have a slight red glow.)

For photocell “On/Off” light-level adjustment, rotate VR2. Clockwise is off and counter-clockwise is on.

For IR power adjustment, rotate VR1. Clockwise is high and counter-clockwise is low.

F.01U.172.707 3.0 2011.02

Instruction Manual

Bosch Security Systems, Inc.

Image 16
Contents EX36 Corner-mount No-grip Camera Page Table of Contents Safety Important Safety InstructionsCorner-mount No-grip Camera Safety en FCC Information Bosch Contact Information Description Parts ListUnpacking User-Supplied Parts Installation Installation StepInitial Preparations Faceplate RemovalNumber Description Faceplate RemovalInput Power Connections Layout of ModulesMounting the Camera Housing Board Connections, LED Voltage Regulator Board VRBMounting Holes EX36N Camera Housing Camera Directional Adjustment LED Adjustments EX36N only Power AdjustmentsLens Replacement Camera Re-assembly Photocell Foam padTroubleshooting Camera Technical InformationTroubleshooting LEDs Problem Possible SolutionGeneral Specifications En Technical Information Corner-mount No-grip Camera Page Bosch Security Systems, Inc