Bosch Appliances instruction manual Mounting Holes EX36N Camera Housing

14 en Installation Corner-mount No-grip Camera

3.Select a mounting surface capable of supporting the combined weight of the unit and mounting hardware to anticipate all expected conditions of both temperature and vibration.

4.Secure all cabling.

NOTICE!

If you are installing the camera on drywall, you must use #8 screws and #8 drywall nylon plugs or a superior connection.

5.Drill holes into the mounting surface. Depending on the type of mounting surface (brick, wood, etc.), you may need to pre-drill the holes for the mounting screws. Bosch recommends that you use the housing as a drill template-- refer to Figure 3.5 for the location of the mounting holes in the housing--to mark the location of the holes, and then drill the holes. This way no burrs or debris will fall into the housing.

Figure 3.5 Mounting Holes - EX36(N) Camera Housing

Note: Each arrow points to a mounting hole.

F.01U.172.707 3.0 2011.02 Instruction Manual Bosch Security Systems, Inc.