Installation en 15 | |
|
|
6.Mount the housing using the supplied mounting screws.
7.Ensure that the power and video cables are not crimped or stressed after the camera has been mounted.
3.5Camera - Directional Adjustment
Both the camera and the LED array can be adjusted for optimum picture quality. The camera lens can be tilted on its axis via two adjustment screws on the mounting bracket. It can also be moved closer to or farther from the viewing window.
1.Mount the Camera/LED Array Assembly into the housing.
2.Connect the video and power wires.
3.Check the picture for quality and directional alignment.
4.If you must adjust the camera’s viewing angle or picture quality, remove the Camera/LED Array Assembly. Refer to Figure 3.6.
Figure 3.6 | Camera Directional Alignment | |
|
|
|
Number | Description |
|
1 | LED Array |
|
2 | Tilt Adjustment |
|
3 | Horizontal Adjustment |
|
4 | Camera/Lens Assembly |
|
5 | Adjustment screw |
|
5.Loosen both adjustment screws for tilt or horizontal directional alignment.
6.Once optimal position is obtained, tighten the screws.
Bosch Security Systems, Inc. | Instruction Manual | F.01U.172.707 3.0 2011.02 |