Axis Communications P1214-E Linux/Unix syntax, Linux/Unix example, Axis Video Hosting System Avhs

Page 33

AXIS P1214 Network Camera

System Options

Linux/Unix syntax

arp -s <IP address> <serial number> temp ping -l 408 <IP address>

Linux/Unix example

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -l 408 192.168.0.125

Windows syntax (this may require that you run the command prompt as an administrator)

arp -s <IP address> <serial number> ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

•To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

•To use the ARP command in Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

•To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

AVHS is enabled by default. The settings are configured under System Options > Network > TCP IP > Basic.

One-click enabled - Press the product’s control button (see Hardware Overview, on page 4 ) to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Axis P1214 Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis P1214 Network Camera Table of ContentsConnectors Hardware OverviewHardware Overview LED Indicators Shorten Sensor Unit CableColor Indication Axis P1214 Network Camera Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateGo to Setup Events Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis P1214 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Image264 Exposure Settings Camera SettingsOverlay Image AppearanceOverlay Image Privacy MaskGo to Video Video Stream and select the Image tab Go to Video Overlay ImageAxis P1214 Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsFor more information about I/O ports, see I/O Ports, on Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsApplications ApplicationsEvents EventsRecipients Events Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with actionRecurrences SchedulesGo to Events Recipients and click Add Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersDate & Time IeeeCertificates Network Basic TCP/IP SettingsLinux/Unix syntax Axis Internet Dynamic DNS ServiceLinux/Unix example Axis Video Hosting System AvhsDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceSmtp email UPnPTMRTP/H.264 StorageBonjour SD CardPorts & Devices MaintenanceNetwork Share PortsAdvanced SupportReset to Factory Default Settings Plain ConfigFile Upload Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlyVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsMaintenance Installation aids Function/group Specifications System ApplicationPower ConnectorsPerformance Considerations Function/group Specifications VideoM4.4
Related manuals
Manual 104 pages 43.64 Kb
Top Page Image Contents