Axis Communications P1214-E Advanced TCP/IP Settings, DNS Configuration, NTP Configuration

Page 34

AXIS P1214 Network Camera

System Options

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see page 30.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Axis P1214 Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsTable of Contents Axis P1214 Network CameraHardware Overview ConnectorsHardware Overview Shorten Sensor Unit Cable LED IndicatorsColor Indication Axis P1214 Network Camera Accessing the Product Accessing the ProductAccess from a Browser Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Click Create self-signed certificateLive View Set Power Line FrequencyGo to Setup Events Controls on the Live ViewAxis Media Control viewer toolbar Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis P1214 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video Stream VideoVideo Pixel CounterImage Stream Profiles264 Overlay Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Privacy MaskOverlay Image Go to Video Overlay ImageAxis P1214 Network Camera Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsFor more information about I/O ports, see I/O Ports, on Camera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersApplications ApplicationsEvents EventsGo to Events Action Rules and click Add Events Setting Up an Action RuleRecipients Recipient Use with actionGo to Events Recipients and click Add SchedulesRecurrences Go to Events Schedules and click AddRecording List RecordingsRecordings Continuous RecordingSecurity System OptionsSystem Options UsersIeee Date & TimeCertificates Basic TCP/IP Settings NetworkLinux/Unix example Axis Internet Dynamic DNS ServiceLinux/Unix syntax Axis Video Hosting System AvhsNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPSmtp email QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMBonjour StorageRTP/H.264 SD CardNetwork Share MaintenancePorts & Devices PortsSupport AdvancedPlain Config Reset to Factory Default SettingsFile Upload Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Video Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationMaintenance Installation aids ConnectorsFunction/group Specifications Video Performance ConsiderationsM4.4
Related manuals
Manual 104 pages 43.64 Kb
Top Page Image Contents