Axis Communications P1214-E user manual Set Power Line Frequency, Controls on the Live View

Page 9

AXIS P1214 Network Camera

Accessing the Product

Set Power Line Frequency

Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 40) or by resetting the product to factory default.

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause image flicker if the product is used in fluorescent light environments.

When using 50 Hz, the maximum frame rate is limited to 25 fps.

Note

Power line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts of the world use 50 Hz. Local variations could apply. Always check with the local authorities.

The Live View Page

The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View page. The following provides an overview of each available control.

Controls on the Live View Page

Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.

Select a stream profile for the Live View page from the Stream Profile drop-down list. For information about how to configure stream profiles, see page 16.

Click Pulse to activate the product’s output port for a defined period of time. For information about how to enable and configure output buttons, see page 21.

Click the Active/Inactive buttons to manually activate and inactive the product’s output port. For information about how to enable and configure output buttons, see page 21.

The Manual Trigger button is used to trigger an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger, on page 9 .

Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration.

To configure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Axis P1214 Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis P1214 Network Camera Table of ContentsConnectors Hardware OverviewHardware Overview LED Indicators Shorten Sensor Unit CableColor Indication Axis P1214 Network Camera Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateGo to Setup Events Set Power Line FrequencyLive View Controls on the Live ViewAxis Media Control viewer toolbar Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis P1214 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Image264 Exposure Settings Camera SettingsOverlay Image AppearanceOverlay Image Privacy MaskGo to Video Video Stream and select the Image tab Go to Video Overlay ImageAxis P1214 Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsFor more information about I/O ports, see I/O Ports, on Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsApplications ApplicationsEvents EventsRecipients Events Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with actionRecurrences SchedulesGo to Events Recipients and click Add Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersDate & Time IeeeCertificates Network Basic TCP/IP SettingsLinux/Unix syntax Axis Internet Dynamic DNS ServiceLinux/Unix example Axis Video Hosting System AvhsDNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM can be disabled under System Options Network UPnPTM QoS Quality of ServiceSmtp email UPnPTMRTP/H.264 StorageBonjour SD CardPorts & Devices MaintenanceNetwork Share PortsAdvanced SupportReset to Factory Default Settings Plain ConfigFile Upload Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video and image problems, general Status and Network indicator LEDs are flashing red rapidlyVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsMaintenance Installation aids Function/group Specifications System ApplicationPower ConnectorsPerformance Considerations Function/group Specifications VideoM4.4
Related manuals
Manual 104 pages 43.64 Kb
Top Page Image Contents