Axis Communications P1214-E user manual Axis P1214 Network Camera

Page 6

AXIS P1214 Network Camera

Hardware Overview

1.Cut the cable to the desired length. Measure from the sensor unit.

2.Strip the plastic outer coating from the end of the cable.

3.Peel back the shield.

4.Flatten the colored wires in the order described below.

1Brown

2White/brown

3Not used

4Not used

5White/blue

6Blue

5.Insert the wires all the way into a shielded 6P6C RJ12 connector. Make sure that the wires stay in the correct order.

6.Use a crimping tool to fasten the connector to the cable.

Image 6

Contents Axis P1214 Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsTable of Contents Axis P1214 Network CameraConnectors Hardware OverviewHardware Overview LED Indicators Shorten Sensor Unit CableColor Indication Axis P1214 Network Camera Accessing the Product Accessing the ProductAccess from a Browser Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Click Create self-signed certificateLive View Set Power Line FrequencyGo to Setup Events Controls on the Live ViewAxis Media Control viewer toolbar Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis P1214 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video Stream VideoVideo Pixel CounterStream Profiles Image264 Overlay Camera SettingsExposure Settings Image AppearanceGo to Video Video Stream and select the Image tab Privacy MaskOverlay Image Go to Video Overlay ImageAxis P1214 Network Camera Live View Config Live View ConfigDefault Viewer for Browsers User Defined Links Viewer SettingsGo to Setup Live View Config Output ButtonsFor more information about I/O ports, see I/O Ports, on Camera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersApplications ApplicationsEvents EventsGo to Events Action Rules and click Add Events Setting Up an Action RuleRecipients Recipient Use with actionGo to Events Recipients and click Add SchedulesRecurrences Go to Events Schedules and click AddRecording List RecordingsRecordings Continuous RecordingSecurity System OptionsSystem Options UsersDate & Time IeeeCertificates Basic TCP/IP Settings NetworkLinux/Unix example Axis Internet Dynamic DNS ServiceLinux/Unix syntax Axis Video Hosting System AvhsNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPSmtp email QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMBonjour StorageRTP/H.264 SD CardNetwork Share MaintenancePorts & Devices PortsSupport AdvancedReset to Factory Default Settings Plain ConfigFile Upload Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationMaintenance Installation aids ConnectorsFunction/group Specifications Video Performance ConsiderationsM4.4

Related manuals

Manual 104 pages 43.64 Kb