Axis Communications M3113-R user manual Network, Basic TCP/IP Settings

Page 35

AXIS M3113-R Network Camera

System Options

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 36.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

IPv4 Address Configuration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can update a DNS server. It is then possible to access the Axis product by name (host name).

If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings (see page 41) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Configuration

If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.

ARP/Ping

The IP address can be set using ARP and Ping. For instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

AVHS is enabled by default. The settings are configured under System Options > Network > TCP IP > Basic.

One-click enabled - Press the product’s control button (see Hardware overview, on page 4 ) to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Axis M3113-R Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis M3113-R Network Camera Table of ContentsHardware overview ConnectorsHardware overview Color Indication LED indicatorsMaintenance Access from a browser Accessing the productAccessing the product Click Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedControls on the Live View Set Power Line FrequencyLive View PTZ Controls Axis Media Control viewer toolbarAxis M3113-R Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsAlternative methods of accessing the video stream Axis M3113-R Network Camera Basic Setup Setting up the productSetting up the product Pixel Counter VideoVideo Video Stream264 Stream ProfilesImage View Area Camera SettingsOverlay image OverlayPrivacy Mask Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Guard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detectionRecommended values Default valuesLow level 0% Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules Recurrences RecipientsSchedules Axis M3113-R Network Camera Continuous recording RecordingsRecordings Recording ListAxis M3113-R Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264System Overview MaintenanceSupport Support OverviewPlain Config Reset to factory default settingsScripting File UploadChecking the firmware TroubleshootingTroubleshooting Emergency recovery procedureProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Status and Network indicator LEDs are flashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format No images displayed on web Video and image problems, generalVideo Camera Settings Problems uploading filesChanges in luminance Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsTemperature Approvals Maintenance Installation aidsMemory Power ConnectorsPerformance considerations Function/group Specifications Weight Kg 0.6 lb IncludedAccessories License Video M1.4
Top Page Image Contents