Axis Communications M3113-R user manual System Options, Security, Users, IP Address Filter

Page 33

AXIS M3113-R Network Camera

System Options

System Options

Security

Users

User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page.

The user list displays authorized users and user groups (access levels):

Viewer - Access to the Live View page

Operator - Access to the Live View page and to all settings except System Options

Administrator - Unrestricted access to all settings; can add, modify and remove other users.

Under HTTP/RTSP Password Settings, select the type of password to allow. You may need to allow unencrypted passwords if there are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need to log in again and be configured to use this functionality.

Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.

Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.

Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should be made before using the Axis product.

ONVIF

ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperablity between different vendor products, increased flexibility, reduced cost and future-proof systems.

By creating a user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For more information see www.onvif.org

IP Address Filter

IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.

The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).

HTTPS

The Axis product supports encrypted browsing using HTTPS. This is configured on the System Options > Security > HTTPS page.

Aself-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click Create self-signed certificate to install a self-signed certificate. Although self-signed certificates are free and offer some protection, true security is only implemented after the installation of a signed certificate issued by a Certificate Authority.

To obtain a signed certificate from an issuing Certificate Authority, click Create Certificate Request. When the signed certificate is returned, click Install signed certificate to import the certificate. The properties of any certificate request currently resident in the product or installed can be viewed by clicking Properties.

To enable HTTPS in the Axis product, the HTTPS Connection Policy must be set for each user group.

For more information, see the online help.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Axis M3113-R Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis M3113-R Network Camera Table of ContentsConnectors Hardware overviewHardware overview LED indicators MaintenanceColor Indication Accessing the product Accessing the productAccess from a browser Set the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateSet Power Line Frequency Live ViewControls on the Live View PTZ Controls Axis Media Control viewer toolbarAxis M3113-R Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Axis M3113-R Network Camera Setting up the product Setting up the productBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Image264 View Area Camera SettingsOverlay Privacy MaskOverlay image Default viewer for browsers Live View ConfigLive View Config Viewer Settings User Defined LinksBrowser Viewer Description PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedDetectors DetectorsCamera Tampering Motion DetectionMotion detection parameters Set up motion detectionDefault values Low level 0%Recommended values Applications ApplicationsEvents EventsSetting Up an Action Rule Convert Event Types to Action RulesGo to Events Action Rules and click Add Recipients SchedulesRecurrences Axis M3113-R Network Camera Recordings RecordingsRecording List Continuous recordingAxis M3113-R Network Camera System Options System OptionsSecurity UsersIeee Date & TimeNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourSupport MaintenanceSupport Overview System OverviewScripting Reset to factory default settingsFile Upload Plain ConfigTroubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Video Camera Settings Video and image problems, generalProblems uploading files No images displayed on webChanges in luminance Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsMemory Power Maintenance Installation aidsConnectors Temperature ApprovalsFunction/group Specifications Weight Kg 0.6 lb Included Accessories License VideoPerformance considerations M1.4
Top Page Image Contents