Axis Communications M3113-R user manual Reset to factory default settings, Scripting, File Upload

Page 41

AXIS M3113-R Network Camera

System Options

Parameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support.

Connection List - Lists all clients that are currently accessing media streams.

Crash Report - Generates an archive with debugging information. The report takes several minutes to generate.

The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Configuration. The Access Log can be configured to list all connections to the product (select Critical, Warnings & Info). If required, a different log level can be used when sending emails.

Advanced

Scripting

Scripting allows experienced users to customize and use their own scripts.

Caution

Improper use may cause unexpected behavior and loss of contact with the Axis product.

Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide assistance for problems with customized scripts.

To open the Script Editor, go to System Options > Advanced > Scripting. It is recommended to create a backup file before customizing the scripts. If a script causes problems, reset the product to its factory default settings, see page 41.

For more information, see www.axis.com/developer

File Upload

Files, for example web pages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, go to System Options > Advanced > File Upload.

Uploaded files are accessed through http://<ip address>/local/<user>/<file name> where <user> is the selected user group (viewer, operator or administrator) for the uploaded file.

Plain Config

Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page. Help is available from the standard help pages.

To open Plain Config, go to System Options > Advanced > Plain Config.

Reset to factory default settings

This will reset all parameters, including the IP address, to the factory default settings:

1.Disconnect power from the product.

2.Press and hold the Control button and reconnect power (see Hardware overview, on page 4 ).

3.Keep the Control button pressed for about 15 seconds until the Status indicator flashes amber.

4.Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The product has been reset to the factory default settings. The default IP address is 192.168.0.90

5.Re-assign the IP address.

It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Axis M3113-R Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsAxis M3113-R Network Camera Table of ContentsHardware overview ConnectorsHardware overview Color Indication LED indicatorsMaintenance Access from a browser Accessing the productAccessing the product Set the root password Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateControls on the Live View Set Power Line FrequencyLive View PTZ Controls Axis Media Control viewer toolbarAxis M3113-R Network Camera Media streams How to stream H.264Media streams Axis Media Control AMCAlternative methods of accessing the video stream Axis M3113-R Network Camera Basic Setup Setting up the productSetting up the product Video VideoVideo Stream Pixel Counter264 Stream ProfilesImage View Area Camera SettingsOverlay image OverlayPrivacy Mask Live View Config Default viewer for browsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourControls AdvancedDetectors DetectorsCamera Tampering Motion DetectionMotion detection parameters Set up motion detectionRecommended values Default valuesLow level 0% Applications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules Recurrences RecipientsSchedules Axis M3113-R Network Camera Recordings RecordingsRecording List Continuous recordingAxis M3113-R Network Camera System Options System OptionsSecurity UsersIeee Date & TimeNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourSupport MaintenanceSupport Overview System OverviewScripting Reset to factory default settingsFile Upload Plain ConfigTroubleshooting TroubleshootingEmergency recovery procedure Checking the firmwareProduct cannot be accessed from a browser Symptoms, possible causes and remedial actionsProblems setting the IP address Status and Network indicator LEDs are flashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format Video Camera Settings Video and image problems, generalProblems uploading files No images displayed on webChanges in luminance Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsMemory Power Maintenance Installation aidsConnectors Temperature ApprovalsPerformance considerations Function/group Specifications Weight Kg 0.6 lb IncludedAccessories License Video M1.4
Top Page Image Contents