Axis Communications M3113-R user manual Storage, UPnPTM, RTP/H.264, Bonjour, Network Share

Page 39

AXIS M3113-R Network Camera

System Options

To use SNMP v3, HTTPS must be enabled, see HTTPS, on page 33. To enable SNMP v3, check the box and provide the initial user password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to factory default settings, on page 41.

UPnPTM

The Axis product includes support for UPnPTM. UPnPTM is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

UPnPTM can be disabled under System Options > Network > UPnPTM.

RTP/H.264

The RTP port range and multicast settings are configured under System Options > Network > RTP.

The RTP port range defines the range of ports from which the video ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.

Select Always Multicast Video to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

Network Share

Network share allows you to add network storage such as a NAS (Network Attached Storage) or any server that uses CIFS (Common Internet File System) and use them for storage of recordings.

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Axis M3113-R Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsAxis M3113-R Network Camera Table of ContentsConnectors Hardware overviewHardware overview LED indicators MaintenanceColor Indication Accessing the product Accessing the productAccess from a browser Click Create self-signed certificate Access from the InternetSet the root password Network TCP/IP AdvancedSet Power Line Frequency Live ViewControls on the Live View PTZ Controls Axis Media Control viewer toolbarAxis M3113-R Network Camera Axis Media Control AMC How to stream H.264Media streams Media streamsAlternative methods of accessing the video stream Axis M3113-R Network Camera Setting up the product Setting up the productBasic Setup Pixel Counter VideoVideo Video StreamStream Profiles Image264 View Area Camera SettingsOverlay Privacy MaskOverlay image Default viewer for browsers Live View ConfigLive View Config Viewer Settings User Defined LinksBrowser Viewer Description Guard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedMotion Detection DetectorsDetectors Camera TamperingMotion detection parameters Set up motion detectionDefault values Low level 0%Recommended values Applications ApplicationsEvents EventsSetting Up an Action Rule Convert Event Types to Action RulesGo to Events Action Rules and click Add Recipients SchedulesRecurrences Axis M3113-R Network Camera Continuous recording RecordingsRecordings Recording ListAxis M3113-R Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264System Overview MaintenanceSupport Support OverviewPlain Config Reset to factory default settingsScripting File UploadChecking the firmware TroubleshootingTroubleshooting Emergency recovery procedureSymptoms, possible causes and remedial actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly No images displayed on web Video and image problems, generalVideo Camera Settings Problems uploading filesChanges in luminance Motion Detection triggers unexpectedlyTechnical Specifications Technical SpecificationsTemperature Approvals Maintenance Installation aidsMemory Power ConnectorsFunction/group Specifications Weight Kg 0.6 lb Included Accessories License VideoPerformance considerations M1.4
Top Page Image Contents