Axis Communications Video and Audio Configuration for AXIS M1031 W Security Cameras

 Page 14

AXIS M1011/M1011-W/M1031-W - Video & Audio Settings

Video & Audio Settings

This section describes how to configure the camera, and is intended for product Administrators, who have unrestricted access to all settings; and Operators, who have access to the settings for Basic Setup, Video & Audio and Events.

You can configure the camera by clicking Setup in the top right-hand corner of the Live View page. Click on this page to access the online help that explains the setup tools.

Video Stream

The video stream settings appear under four different tabs:

•Image

•Audio (AXIS M1031-W)

•H.264 & MPEG-4

•MJPEG

Image

Image Appearance

Use these settings to modify the image resolution and compression. Setting the compression level affects the image quality and the amount of bandwidth required; the lower the compression, the higher the image quality with higher bandwidth requirements.

See the online help files for more information.

Video Stream

To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited radio button option to allow the highest available frame rate; or select the Limited to radio button option and enter a value (1-30) fps in the field.

Text Overlay Settings

Use these settings to include text, date,

and time as overlay. Click for information on available options.

Preview

For a preview of the image before saving the adjusted settings, select the Video Format and click Open.... When satisfied with the settings, click Save.

Audio (AXIS M1031-W)

Check the Enable Audio option to enable audio.

Text, date

&time overlay

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents
USER’S Manual Axis 1011W Network Camera Axis M1031W Network CameraEquipment Modifications LiabilityIntellectual Property Rights Trademark AcknowledgmentsAxis M1011/M1011-W/M1031-W Table of contents Axis M1011/M1011-W/M1031-W Product Description Key featuresProduct Description Overview Setup System Options LED settings Color DescriptionAxis M1011/M1011-W/M1031-W Accessing the Camera Accessing the CameraAccess from a browser Setting the root password Access from the InternetSetting the root password over a secure connection Click the Create self-signed certificate button Axis Media Control AMC toolbar Live View General controls AMC general controlsAMC audio controls Axis M1031-W Axis M1011/M1011-W/M1031-W Video Streams How to stream MPEG-4/H.264Video Streams Alternative methods of accessing the video stream Motion JpegVideo & Audio Settings Video StreamBit Rate Control 264 & MPEG-4 GOV SettingsStream Profiles View Image Settings Camera SettingsExposure Settings Overlay ImageAudio Channels Audio Settings Axis M1031-WPrivacy mask Add a new audio clip Audio Clips Axis M1031-WAudio Output Time. Please refer to the help pages for more informationDefault Viewer Live View ConfigurationAxis M1011/M1011-W/M1031-W Live View Configuration LayoutLight Buttons Action ButtonsUser-defined Links User-defined LinkEvent Servers Event ConfigurationAxis M1011/M1011-W/M1031-W Event Configuration Event TypesPre-trigger and Post-trigger buffers How to set up a triggered eventTriggered Event Camera Tampering Configuration exampleSettings Scheduled EventMotion Detection Configuring Motion DetectionClick Motion Detection in the Event Configuration menu Video Motion DetectionPIR Sensor Port StatusExamples This list shows the input status of the PIR SensorAxis M1011/M1011-W/M1031-W System Options System OptionsSecurity UsersNetwork Basic TCP/IP SettingsDate & Time Axis M1011/M1011-W/M1031-W System Options Audio SupportObtain IP address via Dhcp Use the following IP addressLAN intranet Wireless Settings Wireless Axis M1011-W/AXIS M1031-W onlyStatus of Wireless Networks WEP Wired Equivalent Protection WPA-/WPA2-PSK Wi-Fi Protected Access Pre-Shared KeyWPA-/WPA2-Enterprise Wi-Fi Protected Access Enterprise WPA-/WPA2-EnterpriseRTP/H.264 & MPEG-4 Smtp emailUPnP Snmp V1 includes no securityPorts & Devices LED SettingsMaintenance SupportLogs & Reports ConfigurationAxis M1011/M1011-W/M1031-W System Options System Overview InformationAbout Resetting to the Factory Default SettingsUsing the Control Button Axis M1011/M1011-W/M1031-W AboutEmergency Recovery Procedure TroubleshootingAxis M1011/M1011-W/M1031-W Troubleshooting Upgrading the FirmwareAxis Support Browser Camera is accessible locally, but not externallyProblems with the H.264/MPEG-4 format Problems uploading files Power indicator is not constantly litCamera is inaccessible Set to Decode only I framesNo audio Audio volume too low/highIs enabled under System Options Date & Time Poor audio qualityTechnical Specifications Axis M1011/M1011-W/M1031-W Technical SpecificationsAlarm events Function/group Specification System ApplicationAlarm triggers Video access fromGeneral performance considerations Glossary of Terms Axis M1011/M1011-W/M1031-W Glossary of TermsDuplex See Full-duplex Half-duplex See Full-duplexSee also IP Internet Protocol VOP See VOP Axis M1011/M1011-W/M1031-W Glossary of Terms URL Uniform Resource Locator An address on the network An I-VOP is complete image frameAAC Action Buttons IndexAxis M1011/M1011-W/M1031-W Index WPA-/WPA2-PSK
Related manuals
Manual 114 pages 25.17 Kb
Top Page Image Contents