Axis Communications M1031W, M1011, 1011W user manual Date & Time, Network, Basic TCP/IP Settings

Page 27

AXIS M1011/M1011-W/M1031-W - System Options

Audio Support

Enable audio support - Allow clients to retrieve audio streams from the AXIS M1031-W. See also Audio Settings (AXIS M1031-W),on page 17 for information on how to configure the audio settings.

Note:

This parameter will enable/disable audio globally in the camera, even for configured events and profiles with audio.

Date & Time

Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h clock format in the overlay (see below).

New Server Time - select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select the Automatically adjust for daylight saving time changes.

From the Time Mode section, select the preferred method to use for setting the time:

•Synchronize with computer time - sets the time from the clock on your computer.

•Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes.

•Set manually - this option allows you to manually set the time and date.

Note:

If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. See Network > Basic TCP/IP Settings below.

Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the video streams.

Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats

in the online help for information on how to create your own date and time formats.

Network

Basic TCP/IP Settings

The AXIS M1011/M1011-W/M1031-W supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled. When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static IP address can be set manually. If IPv6 is enabled, the network cameras receive an IP address according to the configuration in the network router. There are also the option of using the AXIS Internet Dynamic DNS Service. For more information on setting the IP address, please see the online help.

Network Settings - Click the View button for an overview of the IP configuration of the network camera.

Network Interface Mode - The network interface to the AXIS M1011-W/AXIS M1031-W Network Camera can be wired or wireless. Different settings can be used for each network interface, but only one can be used at a time. Check the relevant radio button to decide how the different network interfaces will be selected.

IPv4 Address Configuration - Ethernet - These settings are grouped according to the network interface and the version of Internet Protocol (IP). The AXIS M1011/M1011-W/M1031-W supports both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must always be enabled.

When using IPv4, the IP address for the camera can be set automatically via DHCP, or a static (fixed) IP address can be set manually. If IPv6 is enabled, the camera will receive an IP address according to the configuration in the network router.

There are also options for setting up notification of changes in the IP address, and for using the AXIS Internet Dynamic DNS

Service. For more information on setting IP addresses, please see the online help .

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Axis 1011W Network Camera Axis M1031W Network Camera USER’S ManualTrademark Acknowledgments LiabilityIntellectual Property Rights Equipment ModificationsAxis M1011/M1011-W/M1031-W Table of contents Key features Product DescriptionAxis M1011/M1011-W/M1031-W Product Description Overview Color Description Setup System Options LED settingsAccessing the Camera Access from a browserAxis M1011/M1011-W/M1031-W Accessing the Camera Access from the Internet Setting the root passwordClick the Create self-signed certificate button Setting the root password over a secure connectionAMC general controls Live ViewGeneral controls Axis Media Control AMC toolbarAMC audio controls Axis M1031-W How to stream MPEG-4/H.264 Video StreamsAxis M1011/M1011-W/M1031-W Video Streams Motion Jpeg Alternative methods of accessing the video streamVideo Stream Video & Audio Settings264 & MPEG-4 GOV Settings Stream ProfilesBit Rate Control Overlay Image Camera SettingsExposure Settings View Image SettingsAudio Settings Axis M1031-W Privacy maskAudio Channels Time. Please refer to the help pages for more information Audio Clips Axis M1031-WAudio Output Add a new audio clipLayout Live View ConfigurationAxis M1011/M1011-W/M1031-W Live View Configuration Default ViewerUser-defined Link Action ButtonsUser-defined Links Light ButtonsEvent Types Event ConfigurationAxis M1011/M1011-W/M1031-W Event Configuration Event ServersHow to set up a triggered event Triggered EventPre-trigger and Post-trigger buffers Scheduled Event Configuration exampleSettings Camera TamperingVideo Motion Detection Configuring Motion DetectionClick Motion Detection in the Event Configuration menu Motion DetectionThis list shows the input status of the PIR Sensor Port StatusExamples PIR SensorUsers System OptionsSecurity Axis M1011/M1011-W/M1031-W System OptionsAxis M1011/M1011-W/M1031-W System Options Audio Support Basic TCP/IP SettingsDate & Time NetworkUse the following IP address Obtain IP address via DhcpLAN intranet Wireless Axis M1011-W/AXIS M1031-W only Status of Wireless NetworksWireless Settings WPA-/WPA2-Enterprise WPA-/WPA2-PSK Wi-Fi Protected Access Pre-Shared KeyWPA-/WPA2-Enterprise Wi-Fi Protected Access Enterprise WEP Wired Equivalent ProtectionSnmp V1 includes no security Smtp emailUPnP RTP/H.264 & MPEG-4Support LED SettingsMaintenance Ports & DevicesInformation ConfigurationAxis M1011/M1011-W/M1031-W System Options System Overview Logs & ReportsAxis M1011/M1011-W/M1031-W About Resetting to the Factory Default SettingsUsing the Control Button AboutUpgrading the Firmware TroubleshootingAxis M1011/M1011-W/M1031-W Troubleshooting Emergency Recovery ProcedureAxis Support Camera is accessible locally, but not externally Problems with the H.264/MPEG-4 formatBrowser Set to Decode only I frames Power indicator is not constantly litCamera is inaccessible Problems uploading filesPoor audio quality Audio volume too low/highIs enabled under System Options Date & Time No audioAxis M1011/M1011-W/M1031-W Technical Specifications Technical SpecificationsVideo access from Function/group Specification System ApplicationAlarm triggers Alarm eventsGeneral performance considerations Axis M1011/M1011-W/M1031-W Glossary of Terms Glossary of TermsHalf-duplex See Full-duplex Duplex See Full-duplexSee also IP Internet Protocol VOP See VOP Axis M1011/M1011-W/M1031-W Glossary of Terms An I-VOP is complete image frame URL Uniform Resource Locator An address on the networkIndex Axis M1011/M1011-W/M1031-W IndexAAC Action Buttons WPA-/WPA2-PSK
Related manuals
Manual 114 pages 25.17 Kb

1011W, M1011, M1031W specifications

Axis Communications is a pioneer in the field of network cameras and surveillance solutions, providing a range of products tailored to meet various security demands. Among their offerings, the Axis M1031W, M1011, and M1011W stand out for their compact design, user-friendly features, and advanced technologies that cater to both home and small business environments.

The Axis M1031W is a notable addition to Axis' lineup, featuring high-quality video in 720p resolution. This compact camera is designed for easy installation and offers Wi-Fi connectivity, making it suitable for locations where wiring can be a challenge. Its advanced compression technology, including H.264 and Motion JPEG, optimizes bandwidth usage while maintaining high video quality. The M1031W also includes a built-in microphone for audio streaming, adding an additional layer of surveillance capability.

The Axis M1011 is another offering that leverages Axis' renowned technology for surveillance excellence. Offering a resolution of 640x480 pixels, it delivers clear images with excellent color reproduction, even in low-light conditions. It supports Power over Ethernet (PoE), simplifying installation by allowing the camera to receive power and data over a single cable. This makes the M1011 a great choice for installations in hard-to-reach places where power outlets may be limited.

For those looking for a wireless option, the Axis M1011W builds on the features of the M1011 but includes Wi-Fi connectivity. The M1011W ensures high flexibility in installation while providing the same quality video and PoE capabilities as its wired counterpart. With its IP-based design, users can access live video feeds remotely through smartphones, tablets, or computers, ensuring peace of mind from anywhere.

All three models incorporate tamper detection and motion detection features, allowing users to receive alerts when suspicious activity is detected. They also offer customizable motion zones, giving users the ability to tailor surveillance to specific areas of interest.

In conclusion, the Axis M1031W, M1011, and M1011W provide robust surveillance solutions with their advanced technologies, user-friendly features, and flexible installation options. Whether for a home or small business, these cameras deliver high-quality video, reliable performance, and comprehensive security for peace of mind. Axis Communications has indeed positioned itself as a leader in the security camera industry with these powerful, compact models.
Top Page Image Contents