Axis Communications M1145L Axis Media Control viewer toolbar, PTZ Controls, Manual Trigger

Page 10

AXIS M1145–L Network Camera

Accessing the Product

Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

Activate or de-activate IR illumination from Setup > Video > Camera Settings. Move the slider to increase or decrease the intensity of the LEDs. Enable this button from Live View Config > Action Buttons.

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and configuration.

To configure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and configure the other settings as required. For more information about action rules, see Events, on page 33.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Config.

2.Under Action Buttons, select Show manual trigger button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 12 for more information. The toolbar displays the following buttons:

The Play button connects to the Axis product and starts playing a media stream.

The Stop button stops the media stream.

The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specified in the AMC Control Panel.

Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can be specified in the AMC Control Panel. Enable this button from Live View Config > Viewer Settings.

PTZ Controls

The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified users under System Options > Security > Users.

Note

These controls are available if digital PTZ is enabled in the selected view area, see View Area, on page 21.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Axis M1145-L Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M1145-L Network CameraConnectors Performance Considerations Connector Connectors and ButtonsNetwork Connector Hardware OverviewControl Button LED IndicatorsSD Card Slot Color IndicationAccess from a Browser Accessing the ProductAccessing the Product Access from the InternetControls on the Live View Set Power Line FrequencyLive View Click Use HttpsPTZ Controls Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAxis M1145-L Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M1145-L Network Camera Basic Setup Setting Up the ProductSetting Up the Product Focus & ZoomAxis M1145-L Network Camera Pixel Counter Setting Up the Product VideoVideo Stream ImageStream Profiles Camera Settings264 White Balance Exposure SettingsImage Appearance Wide Dynamic RangeBuilt-in IR Illuminations LEDs Iris configurationIris adjustment Day/NightOverlay Setting Up the Product View AreaSelect an Aspect ratio and a Video stream resolution Go to Video View AreaGo to Video Overlay Image Using Overlay Text in an Action RuleOverlay Image Go to Events Action RulesPrivacy Mask Default Viewer for Browsers Live View ConfigLive View Config Viewer SettingsLight Buttons Go to Setup Live View ConfigUser Defined Links Output ButtonsPTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourTour Recording AdvancedControl Queue ControlsCamera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersAxis M1145-L Network Camera Applications Install ApplicationApplications Application LicensesAxis M1145-L Network Camera Events EventsPTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with action RecipientsFallback Action Go to Events Recipients and click AddRecurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddAxis M1145-L Network Camera Recording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 StorageUPnPTM BonjourGo to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share System Options Ports & Devices MaintenanceSupport Scripting System OverviewLogs & Reports File UploadReset to Factory Default Settings Plain ConfigEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video Camera SettingsStorage and disk management problems Storage disruptionTechnical Specifications Technical SpecificationsMaintenance General Casing Function/group Specifications System ApplicationInstallation PowerWarranty ConnectorsAccessories Decoder 1-user license Video Function Pin SpecificationsPerformance Considerations M2.2
Top Page Image Contents