Axis Communications M1145L LED Indicators, SD Card Slot, Control Button, Color Indication

Page 7

AXIS M1145–L Network Camera

Hardware Overview

•Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > Ports & Devices) if the alarm device is activated.

•Digital input – An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active (shown under System Options > Ports & Devices).

SD Card Slot

A microSD card (not included) can be used for local recording with removable storage. For more information, see Technical Specifications, on page 56.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control Button

The control button is used for:

•Resetting the product to factory default settings. See page 51.

•Connecting to an AXIS Video Hosting System service. See page 44. To connect, press and hold the button for about 1 second until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 44. To connect, press and hold the button for about 3 seconds.

LED Indicators

LED

Color

Indication

 

 

 

Network

Green

Steady for connection to a 1 Gbit/s network. Flashes for network activity.

 

 

 

 

Amber

Steady for connection to a 10/100 Mbit/s network. Flashes for network activity.

 

 

 

 

Unlit

No network connection.

 

 

 

Status

Green

Steady green for normal operation.

 

 

 

 

Amber

Steady during startup and when restoring settings.

 

 

 

 

Red

Slow flash for failed upgrade.

 

 

 

Power

Green

Normal operation.

 

 

 

 

Amber

Flashes green/amber during firmware upgrade.

 

 

 

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

•The Power LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Axis M1145-L Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis M1145-L Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Connectors and ButtonsNetwork Connector ConnectorColor Indication LED IndicatorsSD Card Slot Control ButtonAccess from the Internet Accessing the ProductAccessing the Product Access from a BrowserClick Use Https Set Power Line FrequencyLive View Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ ControlsAxis M1145-L Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Axis M1145-L Network Camera Focus & Zoom Setting Up the ProductSetting Up the Product Basic SetupAxis M1145-L Network Camera Image Setting Up the Product VideoVideo Stream Pixel CounterStream Profiles Camera Settings264 Wide Dynamic Range Exposure SettingsImage Appearance White BalanceDay/Night Iris configurationIris adjustment Built-in IR Illuminations LEDsGo to Video View Area Setting Up the Product View AreaSelect an Aspect ratio and a Video stream resolution OverlayGo to Events Action Rules Using Overlay Text in an Action RuleOverlay Image Go to Video Overlay ImagePrivacy Mask Viewer Settings Live View ConfigLive View Config Default Viewer for BrowsersOutput Buttons Go to Setup Live View ConfigUser Defined Links Light ButtonsGuard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedControl Queue Tour RecordingMotion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis M1145-L Network Camera Application Licenses Install ApplicationApplications ApplicationsAxis M1145-L Network Camera Events EventsPTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Go to Events Recipients and click Add RecipientsFallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesAxis M1145-L Network Camera Continuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingAxis Video Hosting System Avhs Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share System Options Ports & Devices MaintenanceSupport File Upload System OverviewLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserVideo Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalStorage disruption Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationInstallation Maintenance General CasingFunction Pin Specifications ConnectorsAccessories Decoder 1-user license Video WarrantyPerformance Considerations M2.2
Top Page Image Contents