Axis Communications M1145L user manual Setting Up an Action Rule, PTZ Control

Page 34

AXIS M1145–L Network Camera

Events

-Recurrence – Trigger the rule periodically. See Recurrences, on page 36. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 36.

Available actions include:

•IR Illumination – Activate or deactivate IR light.

•Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).

•Output Port – Activate an I/O port to control an external device.

•Overlay Text – Display an overlay text. See Using Overlay Text in an Action Rule, on page 22.

•PTZ Control

-Preset Position – Go to a preset position.

•Record Video – Record video to a selected storage.

•Send Images – Send images to a recipient.

•Send Notifications – Send a notification message to a recipient.

•Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured under System Options > Network > SNMP.

•Send Video Clip – Send a video clip to a recipient.

•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.

Setting Up an Action Rule

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an email notification. If multiple conditions are defined, all of them must be met to trigger the action.

The following example describes how to set up an action rule to record video to a network share if there is movement in the camera’s field of view.

Set up motion detection and add a network share:

1.Go to Detectors > Motion Detection and configure a motion detection window. See page 29

2.Go to System Options > Storage and set up the network share. See page 48.

Set up the action rule:

1.Go to Events > Action Rules and click Add.

2.Select Enable rule and enter a descriptive name for the rule.

3.Select Detectors from the Trigger drop-down list.

4.Select Motion Detection from the drop-down list. Select the motion detection window to use.

5.Optionally, select a Schedule and Additional conditions. See below.

6.Under Actions, select Record Video from the Type drop-down list.

7.Select a Stream profile and configure the Duration settings as described below.

8.Select Network Share from the Storage drop-down list.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Axis M1145-L Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M1145-L Network CameraConnectors Performance Considerations Connector Connectors and ButtonsNetwork Connector Hardware OverviewControl Button LED IndicatorsSD Card Slot Color IndicationAccess from a Browser Accessing the ProductAccessing the Product Access from the InternetControls on the Live View Set Power Line FrequencyLive View Click Use HttpsPTZ Controls Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAxis M1145-L Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M1145-L Network Camera Basic Setup Setting Up the ProductSetting Up the Product Focus & ZoomAxis M1145-L Network Camera Pixel Counter Setting Up the Product VideoVideo Stream ImageStream Profiles Camera Settings264 White Balance Exposure SettingsImage Appearance Wide Dynamic RangeBuilt-in IR Illuminations LEDs Iris configurationIris adjustment Day/NightOverlay Setting Up the Product View AreaSelect an Aspect ratio and a Video stream resolution Go to Video View AreaGo to Video Overlay Image Using Overlay Text in an Action RuleOverlay Image Go to Events Action RulesPrivacy Mask Default Viewer for Browsers Live View ConfigLive View Config Viewer SettingsLight Buttons Go to Setup Live View ConfigUser Defined Links Output ButtonsPTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourTour Recording AdvancedControl Queue ControlsCamera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersAxis M1145-L Network Camera Applications Install ApplicationApplications Application LicensesAxis M1145-L Network Camera Events EventsPTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Recipient Use with action RecipientsFallback Action Go to Events Recipients and click AddRecurrences Setting Up an Email RecipientSchedules Go to Events Schedules and click AddAxis M1145-L Network Camera Recording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersCertificates IeeeGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAssign IP Address Using ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Video Hosting System AvhsLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 StorageUPnPTM BonjourGo to System Options Storage and click SD Card Network ShareGo to System Options Storage Click Network Share System Options Ports & Devices MaintenanceSupport Scripting System OverviewLogs & Reports File UploadReset to Factory Default Settings Plain ConfigEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video Camera SettingsStorage and disk management problems Storage disruptionTechnical Specifications Technical SpecificationsMaintenance General Casing Function/group Specifications System ApplicationInstallation PowerWarranty ConnectorsAccessories Decoder 1-user license Video Function Pin SpecificationsPerformance Considerations M2.2
Top Page Image Contents