Axis Communications M1145L user manual Reset to Factory Default Settings, Plain Config

Page 51

AXIS M1145–L Network Camera

System Options

Plain Config

Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page.

To open Plain Config, go to System Options > Advanced > Plain Config. Axis Support does not provide assistance.

Reset to Factory Default Settings

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.

Note

The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup

To reset the product to the factory default settings:

1.Disconnect power from the product.

2.Press and hold the control button and reconnect power. See Hardware Overview, on page 6 .

3.Keep the control button pressed for about 15–30 seconds until the status LED indicator flashes amber.

4.Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

5.Using the installation and management software tools, assign an IP address, set the password, and access the video stream. It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

51

Image 51

Contents Axis M1145-L Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis M1145-L Network Camera Table of ContentsConnectors Performance Considerations Hardware Overview Connectors and ButtonsNetwork Connector ConnectorColor Indication LED IndicatorsSD Card Slot Control ButtonAccess from the Internet Accessing the ProductAccessing the Product Access from a BrowserClick Use Https Set Power Line FrequencyLive View Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ ControlsAxis M1145-L Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Axis M1145-L Network Camera Focus & Zoom Setting Up the ProductSetting Up the Product Basic SetupAxis M1145-L Network Camera Image Setting Up the Product VideoVideo Stream Pixel CounterCamera Settings Stream Profiles264 Wide Dynamic Range Exposure SettingsImage Appearance White BalanceDay/Night Iris configurationIris adjustment Built-in IR Illuminations LEDsGo to Video View Area Setting Up the Product View AreaSelect an Aspect ratio and a Video stream resolution OverlayGo to Events Action Rules Using Overlay Text in an Action RuleOverlay Image Go to Video Overlay ImagePrivacy Mask Viewer Settings Live View ConfigLive View Config Default Viewer for BrowsersOutput Buttons Go to Setup Live View ConfigUser Defined Links Light ButtonsGuard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls AdvancedControl Queue Tour RecordingMotion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis M1145-L Network Camera Application Licenses Install ApplicationApplications ApplicationsAxis M1145-L Network Camera Events EventsSetting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Go to Events Recipients and click Add RecipientsFallback Action Recipient Use with actionGo to Events Schedules and click Add Setting Up an Email RecipientSchedules RecurrencesAxis M1145-L Network Camera Continuous Recording RecordingsRecordings Recording ListLanguages LanguagesUsers System OptionsSystem Options SecurityIeee CertificatesGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingAxis Video Hosting System Avhs Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Network Share Go to System Options Storage and click SD CardGo to System Options Storage Click Network Share Maintenance System Options Ports & DevicesSupport File Upload System OverviewLogs & Reports ScriptingPlain Config Reset to Factory Default SettingsChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserVideo Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalStorage disruption Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Function/group Specifications System ApplicationInstallation Maintenance General CasingFunction Pin Specifications ConnectorsAccessories Decoder 1-user license Video WarrantyPerformance Considerations M2.2