Axis Communications M1054 user manual Advanced TCP/IP Settings, Axis Video Hosting System Avhs

Page 46

AXIS M1054 Network Camera

System Options

ping -l 408 -t <IP address>

Windows example (this may require that you run the command prompt as an administrator)

arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125

4.Check that the network cable is connected and then restart the product by disconnecting and reconnecting power.

5.Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.

6.Open a browser and type http://<IP address> in the Location/Address field.

For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup

Note

•To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.

•To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the command prompt icon and select Run as administrator.

•To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

The AVHS settings are configured under System Options > Network > TCP IP > Basic. The possibility to connect to an AVHS service is enabled by default. To disable, clear the Enable AVHS box.

One-click enabled - Press and hold the product’s control button (see Hardware Overview on page 6 ) for about 3 seconds to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Note

AXIS Internet Dynamic DNS Service requires IPv4.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Axis M1054 Network Camera Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M1054 Network CameraTroubleshooting Connectors Performance ConsiderationsConnector Connectors and ButtonsNetwork Connector Hardware OverviewPower Connector LED IndicatorsControl Button Access from the Internet Access the ProductAccess from a Browser Set the Root PasswordLive View Set Power Line FrequencyClick Create self-signed certificate Controls on the Live View Go to Setup EventsManual Trigger PTZ Controls Axis Media Control viewer toolbarAMC Audio Controls Axis M1054 Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupPixel Counter Video and AudioVideo Stream ImageStream Profiles Click Save to apply the new settings264 View Area Camera SettingsExposure Settings Image AppearanceOverlay Image OverlayGo to Video & Audio Video Stream and select the Image tab Go to Video & Audio Overlay Image Use Overlay Text in an Action RuleGo to Events Action Rules Audio Modes Audio SettingsPrivacy Mask Audio InputAudio Clips Audio OutputViewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionLight Buttons Go to Setup Live View ConfigUser Defined Links Output ButtonsPTZ Pan Tilt Zoom Preset PositionsGuard Tour Control Queue Operator Same as administrator but with lower priorityAdvanced ControlsAxis M1054 Network Camera Motion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Audio Detection Audio DetectionPIR Sensor Go to Events Action Rules and click AddApplications Install ApplicationGo to Setup Applications Application LicensesAxis M1054 Network Camera Events Set Up Action RulesConvert Event Types to Action Rules Triggers Actions Add RecipientsRecipient Types Create Schedules Set Up Email RecipientsGo to Events Schedules and click Add Set Up Recurrences Go to Events Recurrences and click AddContinuous Recording RecordingsRecording List Go to Recordings ListClick Save to save and start the recording Languages Users System OptionsSecurity IP Address FilterCertificates IeeeGo to System Options Security Ieee Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings NetworkAxis Internet Dynamic DNS Service requires IPv4 Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationLink-Local IPv4 Address NTP ConfigurationHost Name Configuration NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM BonjourStorage MaintenancePorts & Devices System Overview SupportSupport Overview Logs & ReportsScripting Reset to Factory Default SettingsPlain Config File UploadEmergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externallyVideo and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Setup Video & Audio Camera SettingsNo audio SettingsStorage and disk management problems Poor audio qualityTechnical Specifications Maintenance Installation aids Function/group Specifications SecurityInstallation SupportedConnectors Performance Considerations M3.7
Related manuals
Manual 114 pages 25.17 Kb

M1054 specifications

Axis Communications has firmly established itself as a leader in the network video surveillance market, offering a wide array of innovative products that cater to various security requirements. One of its noteworthy offerings is the Axis M1054 network camera, which is designed to provide reliable surveillance capabilities while incorporating advanced technologies and features.

The Axis M1054 is a fixed network camera that is particularly well-suited for indoor use. It boasts a compact design that allows for seamless integration into various environments, making it ideal for retail stores, offices, and other commercial spaces. One of its standout features is the ability to deliver high-resolution video, with a 1280x800 resolution at 30 frames per second, ensuring clear and detailed images for effective monitoring.

Equipped with a progressive scan CMOS sensor, the M1054 enhances image quality, providing sharp and vibrant colors. In low-light conditions, the camera continues to perform effectively thanks to its advanced light sensitivity. The built-in electronic day/night functionality automatically adjusts to changing lighting conditions, enabling the camera to maintain high-quality video during both day and night.

In terms of connectivity, the Axis M1054 supports Power over Ethernet (PoE), simplifying installation and reducing cable clutter. This feature allows the camera to receive both power and data through a single Ethernet cable, enabling more flexible placement options. The camera also includes an SD card slot for local storage, providing added redundancy and ensuring critical footage is retained even if network connectivity is lost.

Axis Communications places a strong emphasis on security, and the M1054 is no exception. It features robust security measures, including password protection, IP address filtering, and HTTPS encryption. These features provide a critical layer of defense against unauthorized access, ensuring that recorded video remains secure.

Moreover, the M1054 is compatible with Axis’ wide array of video management software and third-party systems, providing users the flexibility to integrate their surveillance solution into a broader security ecosystem. With its advanced features, reliable performance, and user-friendly design, the Axis M1054 network camera represents an excellent choice for businesses looking to enhance their security measures and ensure peace of mind.
Top Page Image Contents