Axis Communications M1054 user manual QoS Quality of Service, Ftp

Page 48

AXIS M1054 Network Camera

System Options

Note

•For NAT traversal to work, this must be supported by the router. The router must also support UPnPTM.

•In this context, router refers to any network routing device such as a NAT router, Network router, Internet Gateway, Broadband router, Broadband sharing device, or a software such as a firewall.

Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnPTM. Note that UPnPTM must be enabled in the product (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address for the router in the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selected.

Alternative HTTP port - Select this option to manually define an external HTTP port. Enter a port in the range 1024–65535. If the port field is empty or contains the default setting, which is 0, a port number is automatically selected when enabling NAT traversal.

Note

•An alternative HTTP port can be used or be active even if NAT traversal is disabled. This is useful if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.

•If you attempt to manually enter a port that is already in use, another available port is automatically selected.

•When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save.

FTP

The FTP server running in the Axis product enables upload of new firmware, user applications, etc. The FTP server can be disabled under System Options > Network > TCP/IP > Advanced.

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 video streams will not be available if the RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).

SOCKS is configured under System Options > Network > SOCKS. For more information, see the online help .

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a specified resource to selected traffic on a network. A QoS-aware network prioritizes network traffic and provides a greater network reliability by controlling the amount of bandwidth an application may use.

The QoS settings are configured under System Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark different types of traffic.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Axis M1054 Network Camera About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis M1054 Network CameraTroubleshooting Connectors Performance ConsiderationsConnectors and Buttons Network ConnectorConnector Hardware OverviewLED Indicators Power ConnectorControl Button Access the Product Access from a BrowserAccess from the Internet Set the Root PasswordSet Power Line Frequency Live ViewClick Create self-signed certificate Go to Setup Events Controls on the Live ViewManual Trigger Axis Media Control viewer toolbar PTZ ControlsAMC Audio Controls Axis M1054 Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupVideo and Audio Video StreamPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Camera Settings Exposure SettingsView Area Image AppearanceOverlay Overlay ImageGo to Video & Audio Video Stream and select the Image tab Use Overlay Text in an Action Rule Go to Video & Audio Overlay ImageGo to Events Action Rules Audio Settings Privacy MaskAudio Modes Audio InputAudio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksLight Buttons Output ButtonsPreset Positions PTZ Pan Tilt ZoomGuard Tour Operator Same as administrator but with lower priority AdvancedControl Queue ControlsAxis M1054 Network Camera Detectors Camera TamperingMotion Detection Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection PIR SensorGo to Detectors Audio Detection Go to Events Action Rules and click AddInstall Application Go to Setup ApplicationsApplications Application LicensesAxis M1054 Network Camera Set Up Action Rules EventsConvert Event Types to Action Rules Triggers Add Recipients ActionsRecipient Types Set Up Email Recipients Create SchedulesGo to Events Schedules and click Add Set Up Recurrences Go to Events Recurrences and click AddRecordings Recording ListContinuous Recording Go to Recordings ListClick Save to save and start the recording Languages System Options SecurityUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Click Install certificate and upload the certificateDate & Time Audio SupportBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 BonjourMaintenance StoragePorts & Devices Support Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigScripting File UploadTroubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Function/group Specifications Security InstallationMaintenance Installation aids SupportedConnectors Performance Considerations M3.7
Related manuals
Manual 114 pages 25.17 Kb

M1054 specifications

Axis Communications has firmly established itself as a leader in the network video surveillance market, offering a wide array of innovative products that cater to various security requirements. One of its noteworthy offerings is the Axis M1054 network camera, which is designed to provide reliable surveillance capabilities while incorporating advanced technologies and features.

The Axis M1054 is a fixed network camera that is particularly well-suited for indoor use. It boasts a compact design that allows for seamless integration into various environments, making it ideal for retail stores, offices, and other commercial spaces. One of its standout features is the ability to deliver high-resolution video, with a 1280x800 resolution at 30 frames per second, ensuring clear and detailed images for effective monitoring.

Equipped with a progressive scan CMOS sensor, the M1054 enhances image quality, providing sharp and vibrant colors. In low-light conditions, the camera continues to perform effectively thanks to its advanced light sensitivity. The built-in electronic day/night functionality automatically adjusts to changing lighting conditions, enabling the camera to maintain high-quality video during both day and night.

In terms of connectivity, the Axis M1054 supports Power over Ethernet (PoE), simplifying installation and reducing cable clutter. This feature allows the camera to receive both power and data through a single Ethernet cable, enabling more flexible placement options. The camera also includes an SD card slot for local storage, providing added redundancy and ensuring critical footage is retained even if network connectivity is lost.

Axis Communications places a strong emphasis on security, and the M1054 is no exception. It features robust security measures, including password protection, IP address filtering, and HTTPS encryption. These features provide a critical layer of defense against unauthorized access, ensuring that recorded video remains secure.

Moreover, the M1054 is compatible with Axis’ wide array of video management software and third-party systems, providing users the flexibility to integrate their surveillance solution into a broader security ecosystem. With its advanced features, reliable performance, and user-friendly design, the Axis M1054 network camera represents an excellent choice for businesses looking to enhance their security measures and ensure peace of mind.
Top Page Image Contents