Axis Communications AXIS P5522E user manual Triggers, Actions

Page 35

AXIS P5522–E PTZ Dome Network Camera

Events

For more information, see the online help .

Triggers

Available action rule triggers and conditions include:

Applications – Use installed applications to trigger the rule. See Applications on page 32.

Detectors

-Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection on page 30.

Hardware

-Fan – Trigger the rule if the fan is malfunctioning. This can for example be used to send maintenance notifications.

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

Input Signal

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. See Controls on the Live View Page on page 11 . This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

PTZ

Storage

-Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance notifications.

System

-System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

Time

-Recurrence – Trigger the rule periodically. See Set Up Recurrences on page 37. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Create Schedules on page 37.

Actions

Available actions include:

Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 22.

PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. See Guard Tour on page 27.

35

Image 35
Contents Axis P5522-E PTZ Dome Network Camera Equipment Modifications About this document Legal ConsiderationsLiability Intellectual Property RightsLearn More SupportAxis P5522-E PTZ Dome Network Camera Table of ContentsTechnical Specifications Other Message Levels Safety InformationHazard Levels Hardware Overview Dome Cover Connectors and ButtonsNetwork Connector Control Button LED IndicatorsMidspan LED Indicators SD Card SlotAccess from the Internet Access the ProductAccess from a Browser Controls on the Live View Set the Root PasswordSet Power Line Frequency Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar PTZ ControlsAxis P5522-E PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream Axis P5522-E PTZ Dome Network Camera Basic Setup Set Up the Product264 Set Up Video StreamsVideo ImageImage Appearance Camera SettingsStream Profiles IR cut filter Exposure SettingsWhite Balance Wide Dynamic RangeGo to Video Video Stream and select the Image tab Image SettingsOverlay Overlay ImageGo to Events Action Rules Use Overlay Text in an Action RuleGo to Video Overlay Image Privacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsOutput Buttons Go to Setup Live View ConfigUser Defined Links Gatekeeper Preset PositionsPTZ Pan Tilt Zoom Limits Guard TourOsdi Zones AdvancedControls Control Queue Operator Same as administrator but with lower priorityMotion Detection Parameters Set Up Motion Detection WindowsDetectors Motion DetectionRecommended values Default valuesMedium level 50% Low level 0%Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis P5522-E PTZ Dome Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action RulesActions TriggersRecipient Use with action Add RecipientsRecipient Types Go to Events Recipients and click AddGo to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create SchedulesAxis P5522-E PTZ Dome Network Camera Go to Recordings List RecordingsRecording List Continuous RecordingLanguages IP Address Filter System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Assign IP Address Using ARP/PingAxis Video Hosting System Avhs Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service DNS ConfigurationNAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Format SD Card Mount and Unmount SD CardGo to System Options Storage Click Network Share MaintenanceNetwork Share Support Plain Config Reset to Factory Default SettingsCheck the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserKey frames Problems with streaming H.264Video and image problems, general Video Camera SettingsCondensation in dome Storage and disk management problemsTechnical Specifications Memory Power Function/group Specifications System ApplicationInstallation Maintenance General CasingPerformance Considerations Function/group Specifications VideoM4.2