Axis Communications AXIS P5522E user manual Controls

Page 28

AXIS P5522–E PTZ Dome Network Camera

PTZ (Pan Tilt Zoom)

Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed.

When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is useful then the view is zoomed in on an object.

When Enable Auto-flipis selected, the Axis product will simulate continuous pan movement in the same direction, i.e. the camera will pan the full 360 degrees, even though there is a mechanical stop at ±180 degrees.

When Enable movement prediction is selected, the Axis product will attempt to predict the new position in the pan movement, after compensating for the slight delay while the camera changes direction after an auto-flip. This is useful for tracking moving objects or persons when using the joystick or emulated joystick mode.

See the online help for more information.

Controls

Advanced PTZ settings can be configured under PTZ > Advanced > Controls.

The Panel Shortcut Command Buttons list shows the user-defined buttons that can be accessed from the Live View page’s Ctrl panel. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface. Click Add to add a new shortcut command button.

The following PTZ controls are enabled by default:

Pan control

Tilt control

Zoom control

Focus control

Iris control

To disable specific controls, deselect the options under Enable/Disable controls.

28

Image 28
Contents Axis P5522-E PTZ Dome Network Camera About this document Legal Considerations LiabilityIntellectual Property Rights Equipment ModificationsSupport Learn MoreTable of Contents Axis P5522-E PTZ Dome Network CameraTechnical Specifications Hazard Levels Safety InformationOther Message Levels Hardware Overview Network Connector Connectors and ButtonsDome Cover LED Indicators Midspan LED IndicatorsSD Card Slot Control ButtonAccess from a Browser Access the ProductAccess from the Internet Set the Root Password Set Power Line FrequencyLive View Controls on the Live ViewGo to Setup Events Axis Media Control viewer toolbarPTZ Controls Manual TriggerAxis P5522-E PTZ Dome Network Camera Media Streams How to Stream H.264Axis Media Control AMC Alternative Methods of Accessing the Video Stream Axis P5522-E PTZ Dome Network Camera Set Up the Product Basic SetupSet Up Video Streams VideoImage 264Stream Profiles Camera SettingsImage Appearance Exposure Settings White BalanceWide Dynamic Range IR cut filterImage Settings OverlayOverlay Image Go to Video Video Stream and select the Image tabGo to Video Overlay Image Use Overlay Text in an Action RuleGo to Events Action Rules Privacy Mask Configure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons PTZ Pan Tilt Zoom Preset PositionsGatekeeper Guard Tour Osdi ZonesAdvanced LimitsControls Operator Same as administrator but with lower priority Control QueueSet Up Motion Detection Windows DetectorsMotion Detection Motion Detection ParametersDefault values Medium level 50%Low level 0% Recommended valuesInstall Application Go to Setup ApplicationsApplications Application LicensesAxis P5522-E PTZ Dome Network Camera Set Up Action Rules EventsConvert Event Types to Action Rules Go to Events Action Rules and click AddTriggers ActionsAdd Recipients Recipient TypesGo to Events Recipients and click Add Recipient Use with actionSet Up Recurrences Set Up Email RecipientsCreate Schedules Go to Events Schedules and click AddAxis P5522-E PTZ Dome Network Camera Recordings Recording ListContinuous Recording Go to Recordings ListLanguages System Options SecurityUsers IP Address FilterCertificates IeeeGo to System Options Security Ieee Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceDNS Configuration Axis Video Hosting System AvhsNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPStorage UPnPTMRTP/H.264 BonjourMount and Unmount SD Card Format SD CardNetwork Share MaintenanceGo to System Options Storage Click Network Share Support Reset to Factory Default Settings Plain ConfigTroubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Video and image problems, generalVideo Camera Settings Key framesStorage and disk management problems Condensation in domeTechnical Specifications Function/group Specifications System Application InstallationMaintenance General Casing Memory PowerFunction/group Specifications Video Performance ConsiderationsM4.2