FLEXIDOME HD VR | Installation en 27 |
|
|
5.6Camera positioning and field-of-view
The camera module position can be adjusted along three axes and several zoom positions can be selected.
To help position the camera and set the
1.Connect a monitor to the 2.5 mm jack using the optional monitor cable (S1460) which provides a CVBS signal (for installation purposes only).
2.Apply power to the camera.
3.After
4.Press the Menu button. This stops the IP video stream and enables the service video analog output.
S1460
FoV
CAUTION!
Do not expose the sensors to direct sunlight.
Bosch Security Systems | Installation Manual |