Bosch Appliances NIN-932, NIN-832, NIN-733 Connection in applications, Type label, Grounding

8 en Safety FLEXIDOME HD VR

1.3Connection in applications

Grounding

The yellow/green safety (power) ground wire from the camera must be connected to the system earth of the installation. U.S.A.: - section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding.

12 VDC / 24 VAC power source: This unit is intended to operate with a limited power source. The unit is intended to operate at either 12 VDC or 24 VAC (if PoE is not available). User supplied wiring must be in compliance with electrical codes (Class 2 power levels).

PoE: Use only certified PoE devices. Power-over-Ethernet can be connected at the same time as a 12 VDC or 24 VAC power supply.

If auxiliary power (12 VDC or 24 VAC) and PoE are applied simultaneously, the camera selects auxiliary input and shuts off the PoE.

1.4Type label

The type label is located on the side of the camera module.

AM18-Q0637 v1.1 2013.08 Installation Manual Bosch Security Systems