Panasonic WV-NW474S Network Connection Types, Direct Connection to PC Type, Necessaries

Page 15

Network Connection Types

Prior to connections, specify the connection type and prepare relevant devices and cables.

Notes:

We recommend that you use connection type 1 or type 2 when setting up the network address of the camera.

Be sure to unplug or switch all the devices off, then start connections.

Direct Connection to PC (Type 1)

Use a cross-type network cable in the category 5 to connect the camera directly with the PC.

Network Cable (Cross type)

PC

Necessaries: Cross-type network cable (Category 5)

Connection to Intranet (Type 2)

A switching hub connected to the intranet is placed between the camera and the PC.

Switching Hub

Network Cable

(Straight type)

Network Cable

(Straight type)

PC

(16 clients maximum)

Necessaries:

Straight-type network cable (Category 5)

Switching hub or router (10BASE-T/100BASE-TX applicable)

Connection to Internet (Type 3)

The PC accesses the camera through the Internet and the DSL/CATV modem.

DSL/CATV Modem

Internet

Network Cable

(Straight type)

PC

(16 clients maximum)

Necessaries:

Straight-type network cable (Category 5)

CATV modem (cable modem) or DSL modem

Connection to Internet (Type 4)

A switching hub or a router may be added to type 3 connection.

Switching Hub or Router

Internet

Network Cable

 

 

 

DSL/CATV Modem

(Straight type)

 

 

 

PC

(16 clients maximum)

Necessaries:

Straight-type network cable (Category 5)

CATV modem (cable modem) or DSL modem

Switching hub or router (10BASE-T/100BASE-TX applicable)

Notes:

Setting the router is required when connecting more than one camera. Refer to the manual included with the router.

The camera does not support the PPPoE. Use a router that handles PPPoE when connecting the camera using that protocol.

A global-type IP address is required when connect- ing via the Internet.

-15-

Image 15
Contents Operating Instructions For Canada English Important Safety InstructionsContents Trademarks FeaturesPreface System RequirementsDocument Convention Do not aim the camera at the same object for a long time PrecautionsHandle the camera with care Never face the camera towards the sunMajor Operating Controls & Their Functions @4Power cable 8DIP switch@2Video output connector @3Control connectorProcurement InstallationInstallation Plans & Preparations Installation spaceMounting the Camera Mounting the CameraDisassembling the Camera Optional Heater UnitConnections Power ConnectionWire colors & functions Cable length and wire gaugeNetwork Port Connection Image AdjustmentControl Connector Video Output ConnectionWaterproof Process Connection to Internet Type Network Connection TypesDirect Connection to PC Type Connection to Intranet TypePreparations for Network Connections Network Setup of Your PCNetwork Setup of the Camera Using Panasonic IP Setup SoftwareDNS Using Network Setup Menu Dhcp DNSDdns Page ALL Reset button Prior to Camera SetupButtons Used for Setup Camera Setup Menus¡From the Camera Setup Menu Tree Camera Identification Camera ID Setting Setting ProceduresSetup Selection Camera Setup Menu CAMTo replace a specific character in the Camera ID Light Control Setting ALCCommand Usage To edit the Camera IDGain Control Setting AGC on DNR-L, DNR-H/OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Synchronization Setting Sync White Balance Setting White BALATW1 Auto-Tracing White Balance Push SW Motion Detector Setting Motion DETAutomatic White Balance Control Mode AWC Manual Fine Adjustment for AWC ATWSpecial Menu Special Menu/DIP SW Selection10-7. BW To reset to the factory settings Camera ResetHttp Port Number Network Setup Network SetupInitializing the Camera Menu Initializing the Setup Menu Initializing Html FilesTroubleshooting InitializingNetwork Section SpecificationsTCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP Prevention of Blooming and SmearWV-CW2C Standard AccessoriesOptional Accessories GeneralOptional Heater Unit WV-CW3H AppendixWV-NW474S Procédure DE Réglage Avant LA Configuration DE LA Caméra VidéoPréface Préparatifs DE Connexion RéseauMarques commerciales PréfaceCaractéristiques dominantes Conditions système requisesConvention de ce document Manipuler la caméra vidéo sans brutalités Mesures DE PrécautionPrincipaux Organes DE Commande ET Leurs Fonctions @4Cordon d’alimentation @3Connecteur de commande8Interrupteur DIP @2Connecteur de sortie vidéoAcheminement des câbles Plans dinstallation et préparatifsEspace dinstallation Se procurerDispositif de chauffage optionnel Installation de la caméra vidéoInstallation de la caméra vidéo Démontage de la caméra vidéoCouleurs des fils et fonctions ConnexionsConnexion dalimentation PrécautionsConnexion de port réseau Connecteur de commandeRéglages dimage Connecteur de sortie vidéoTraitement détanchéité Connexion à lIntranet Type Accessoires indispensablesTypes de connexion de réseau Connexion directe à l’ordinateur personnel TypePréparatifs DE Connexion Réseau Configuration de réseau de ’ordinateur personnelConfiguration réseau de la caméra vidéo Utilisation du menu de configuration de réseau Remarques Bouton ALL Reset Avant LA Configuration DE LA Caméra VidéoBoutons utilisés pour effectuer la Configuration Menus de configuration de caméra VidéoPartir de la caméra vidéo Le bouton SET. Le menu CAM Setup souvreArborescence de menu de configuration Paramétrage didentification de la caméra vidéo Camera ID Sélection de la configurationMenu de configuration de caméra vidéo CAM SET UP Procédure DE RéglageMode ALC avec la fonction SUPER-D2 OFF Réglage de contrôle de lumière ALCUsage des instructions Réglage de la vitesse d’obturation Shutter Paramétrage de réglage de gain AGC on DNR-L, DNR-H/OFFRehaussement de la sensibilité électronique Sens UP Réglage de synchronisation Sync Calage du détecteur de mouvement Réglage de balance des blancs White BAL10-2. Réglage de niveau de chrominance Chroma Gain Menu/Sélection DIP SWMenu spécial Special Motion DetectNoir et blanc BW Paramètre de phase de chrominance teinte HUE10-3. Réglage de gain d’ouverture AP SHARP/AP Soft Zoom électronique EL-ZOOMConfiguration de réseau Network Burst BWNuméro de port Http Initialisation du menu de caméra vidéo Initialisation du menu de configurationInitialisation DépannageCaractéristiques Techniques Section réseauSection de caméra vidéo Accessoires Standard Accessoires OptionnelsGénérales Dispositif de chauffage optionnel WV-CW3H AnnexePage Panasonic Digital Communications & Security Company

WV-NW474S specifications

The Panasonic WV-NW474S is a high-performance network camera specifically designed for a variety of surveillance applications. This innovative model is known for its outstanding image quality, advanced features, and reliable performance in diverse environments. With a focus on enhancing security monitoring, the WV-NW474S integrates sophisticated technologies that set it apart in the competitive market of network cameras.

One of the main features of the WV-NW474S is its exceptional imaging capability. It is equipped with a 1/3-inch progressive scan CCD sensor, which delivers high-resolution video at 640x480 pixels. The camera supports both standard and high-definition streaming, enabling users to capture clear images even in challenging conditions. The incorporation of advanced digital signal processing ensures that the image quality remains consistent, reducing noise and improving visibility in low-light scenarios.

Another significant technological advancement in the WV-NW474S is its wide dynamic range (WDR) functionality. This feature enables the camera to adjust to varying lighting conditions, making it especially effective in environments with intense backlighting. WDR allows the camera to capture details in both shadows and highlights, ensuring that important details are not lost.

The WV-NW474S also emphasizes flexibility in installation and usage. It supports multiple codecs, including H.264 and Motion JPEG, and offers dual streaming capabilities. This flexibility allows users to choose the optimal compression format based on their network conditions and storage capacity. Furthermore, the camera features a user-friendly web interface for easy configuration and monitoring, making it accessible even for those with minimal technical expertise.

Additionally, the WV-NW474S is built to withstand various environmental challenges. It is designed with an IP66-rated housing, providing protection against dust and water ingress. This rugged design ensures reliable operation in outdoor settings or industrial environments, making it a dependable solution for security monitoring.

On the connectivity front, the WV-NW474S includes various network protocols, ensuring compatibility with diverse surveillance systems. It has the capability for Power over Ethernet (PoE), enabling power delivery and network connectivity through a single cable, simplifying installation.

In summary, the Panasonic WV-NW474S network camera combines high-resolution imaging, advanced WDR capabilities, robust environmental protection, and comprehensive connectivity options. These features make it an ideal choice for both commercial and residential surveillance needs, offering reliability and performance that users can trust. Whether for monitoring public spaces or securing private properties, the WV-NW474S stands out as a versatile and trustworthy security solution.