Panasonic WV-NW474S Setting Procedures, Setup Selection, Camera Setup Menu CAM

SETTING PROCEDURES

The following pages describe setting operations from the camera.

For accessing from the PC, interpret these instructions as follows.

Function	From the Camera	From the PC
Opening the camera setup menu	Hold down the [SET] button for 2 seconds.	Click the Camera Setup button in the
		main page to display the menu control
		buttons.
		Click the [MENU ON] button.
Closing the camera setup menu	Press the [SET] button while the cursor is	Click the [MENU OFF] button.
	at END.
Opening a more detailed setup	Press the [SET] button while the cursor is	Click the [SET] button while the cursor is
menu	at an item tailed with O mark.	at the item tailed with O mark.
Returning to the previous menu	Press the [SET] button while the cursor is	Click the [SET] button while the cursor is
	at RET.	at RET or simply clock the [ESC] button.
Opening the special menu	Hold down the [Left] and [Right] buttons	Click the [RESET/SPECIAL] button while
	simultaneously while the cursor is at END	the cursor is at END in CAM SETUP.
	in CAM SETUP.
Resetting the parameter of an item	Hold down the [Left] and [Right] buttons	Click the [RESET/SPECIAL] button while
	simultaneously while the cursor is at the	the cursor is at the item.
	item.
Resetting all the settings	Hold down the [Left], [Right], and [SET]	Click the [ALL RESET] button while the
	buttons simultaneously while the cursor is	cursor is at CAMERA RESET.
	at CAMERA RESET.
Selecting an item	Press the [Up] or [Down] button.	Click the [D] or [C] button.
Selecting a parameter	Press the [Left] and [Right] button.	Click the [A] or [B] button.
Validating the selection	Press the [SET] button.	Click the [SET] button.
Escaping from the VMD mask setup	Hold down the [SET] button for 2 seconds.	Click the [ESC] button.
etc.

■Setup Selection

**SET UP **

CAMERA↵

NETWORK↵
END	SET UP DISABLE

1.	Move the cursor to CAMERA or NETWORK, and
	press [SET] to open the desired setup menu.
	CAMERAN: Opens the CAMERA SETUP menu.
	NETWORKN: Opens the NETWORK SETUP menu.
2.	Move the cursor to END, and press [SET] to return
	to camera image screen.

■Camera Setup Menu (CAM

SETUP)

** CAM SET UP **

CAMERA ID	OFF	↵
ALC	ALC	↵
SHUTTER	---
AGC	ON(DNR-H)
SENS UP	OFF
SYNC	INT
WHITE BAL	ATW1↵
MOTION DET	OFF

MENU

RET END

1. Camera Identification (CAMERA ID) Setting

You can assign a name to the camera. The camera ID consists of up to 16 alphanumeric characters. The camera ID display can be switched on and off on the monitor screen.

Note: When SETUP DISABLE appears in the bot-

tom line you cannot change the currently active

settings. This disablement is designed to pre- vent accidental setting change. Refer to the pre- vious page to change it to ENABLE.

Character Cursor

0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$

SPACE

POSI RET END RESET

................

Cursor

Character

Area

Command

Editing

Area

CAMERA ID menu

-23-