Panasonic WV-NW474S operating instructions Network Setup Network Setup, Http Port Number

Page 30

■Network Setup (NETWORK SETUP)

Set up network parameters when connecting the 10/100BASE jack with a network.

Notes:

•Access the setup menu from the PC to use the DHCP or DNS server, because these settings are not included in this window.

•Ask your system administrator or ISP (Internet Service Provider) about available IP address, subnet mask, and gateway, prior to setup.

•The assigned address should be a global type when connecting via the Internet. Ask your ISP whether it is.

** NETWORK SET UP **

IP

 

ADDRESS

192.168.

0.

10

 

 

 

 

NETMASK

255.255.255.

0

GATEWAY

192.168.

0.

1

HTTP PORT NO.

 

80

DHCP

 

OFF

 

 

RET END

1.Move the cursor to NETWORK SETUP in the SETUP menu window and press [SET]. The NETWORK SETUP menu opens.

The factory default settings are as follows. IP ADDRESS: 192.168.0.10 NETMASK: 255.255.255.0

GATE WAY: 192.168.0.1

HTTP Port Number: 80

DHCP: OFF

2.Move the cursor to the line you wish to edit, and press [SET].

Parameters become editable.

3.Select a digit using [Left] or [Right].

4.Select a number in the digit using [Up] or [Down].

5.Repeat steps 2, 3 and 4 above appropriately until all parameters are set.

6.Move the cursor to END and press [SET] to close the setup menu and store new settings, or select RET to go back to the SETUP menu.

Note: The port number assigned to the camera is exclusive, and any other usage is not allowed.

-30-

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating Instructions For Canada Important Safety Instructions EnglishContents System Requirements FeaturesPreface TrademarksDocument Convention Never face the camera towards the sun PrecautionsHandle the camera with care Do not aim the camera at the same object for a long timeMajor Operating Controls & Their Functions @3Control connector 8DIP switch@2Video output connector @4Power cableInstallation space InstallationInstallation Plans & Preparations ProcurementOptional Heater Unit Mounting the CameraDisassembling the Camera Mounting the CameraCable length and wire gauge Power ConnectionWire colors & functions ConnectionsVideo Output Connection Image AdjustmentControl Connector Network Port ConnectionWaterproof Process Connection to Intranet Type Network Connection TypesDirect Connection to PC Type Connection to Internet TypeNetwork Setup of Your PC Preparations for Network ConnectionsNetwork Setup of the Camera Using Panasonic IP Setup SoftwareDNS Using Network Setup Menu Dhcp DNSDdns Page Camera Setup Menus Prior to Camera SetupButtons Used for Setup ALL Reset button¡From the Camera Setup Menu Tree Camera Setup Menu CAM Setting ProceduresSetup Selection Camera Identification Camera ID SettingTo edit the Camera ID Light Control Setting ALCCommand Usage To replace a specific character in the Camera IDGain Control Setting AGC on DNR-L, DNR-H/OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Synchronization Setting Sync White Balance Setting White BALATW1 Auto-Tracing White Balance Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETAutomatic White Balance Control Mode AWC Push SWMenu/DIP SW Selection Special Menu SpecialTo reset to the factory settings Camera Reset 10-7. BWNetwork Setup Network Setup Http Port NumberInitializing Initializing the Setup Menu Initializing Html FilesTroubleshooting Initializing the Camera MenuPrevention of Blooming and Smear SpecificationsTCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP Network SectionGeneral Standard AccessoriesOptional Accessories WV-CW2CAppendix Optional Heater Unit WV-CW3HWV-NW474S Préparatifs DE Connexion Réseau Avant LA Configuration DE LA Caméra VidéoPréface Procédure DE RéglageConditions système requises PréfaceCaractéristiques dominantes Marques commercialesConvention de ce document Mesures DE Précaution Manipuler la caméra vidéo sans brutalitésPrincipaux Organes DE Commande ET Leurs Fonctions @2Connecteur de sortie vidéo @3Connecteur de commande8Interrupteur DIP @4Cordon d’alimentationSe procurer Plans dinstallation et préparatifsEspace dinstallation Acheminement des câblesDémontage de la caméra vidéo Installation de la caméra vidéoInstallation de la caméra vidéo Dispositif de chauffage optionnelPrécautions ConnexionsConnexion dalimentation Couleurs des fils et fonctionsConnecteur de sortie vidéo Connecteur de commandeRéglages dimage Connexion de port réseauTraitement détanchéité Connexion directe à l’ordinateur personnel Type Accessoires indispensablesTypes de connexion de réseau Connexion à lIntranet TypeConfiguration de réseau de ’ordinateur personnel Préparatifs DE Connexion RéseauConfiguration réseau de la caméra vidéo Utilisation du menu de configuration de réseau Remarques Menus de configuration de caméra Vidéo Avant LA Configuration DE LA Caméra VidéoBoutons utilisés pour effectuer la Configuration Bouton ALL ResetLe bouton SET. Le menu CAM Setup souvre Partir de la caméra vidéoArborescence de menu de configuration Procédure DE Réglage Sélection de la configurationMenu de configuration de caméra vidéo CAM SET UP Paramétrage didentification de la caméra vidéo Camera IDMode ALC avec la fonction SUPER-D2 OFF Réglage de contrôle de lumière ALCUsage des instructions Réglage de la vitesse d’obturation Shutter Paramétrage de réglage de gain AGC on DNR-L, DNR-H/OFFRehaussement de la sensibilité électronique Sens UP Réglage de synchronisation Sync Réglage de balance des blancs White BAL Calage du détecteur de mouvementMotion Detect Menu/Sélection DIP SWMenu spécial Special 10-2. Réglage de niveau de chrominance Chroma GainZoom électronique EL-ZOOM Paramètre de phase de chrominance teinte HUE10-3. Réglage de gain d’ouverture AP SHARP/AP Soft Noir et blanc BWConfiguration de réseau Network Burst BWNuméro de port Http Dépannage Initialisation du menu de configurationInitialisation Initialisation du menu de caméra vidéoCaractéristiques Techniques Section réseauSection de caméra vidéo Accessoires Standard Accessoires OptionnelsGénérales Annexe Dispositif de chauffage optionnel WV-CW3HPage Panasonic Digital Communications & Security Company

WV-NW474S specifications

The Panasonic WV-NW474S is a high-performance network camera specifically designed for a variety of surveillance applications. This innovative model is known for its outstanding image quality, advanced features, and reliable performance in diverse environments. With a focus on enhancing security monitoring, the WV-NW474S integrates sophisticated technologies that set it apart in the competitive market of network cameras.

One of the main features of the WV-NW474S is its exceptional imaging capability. It is equipped with a 1/3-inch progressive scan CCD sensor, which delivers high-resolution video at 640x480 pixels. The camera supports both standard and high-definition streaming, enabling users to capture clear images even in challenging conditions. The incorporation of advanced digital signal processing ensures that the image quality remains consistent, reducing noise and improving visibility in low-light scenarios.

Another significant technological advancement in the WV-NW474S is its wide dynamic range (WDR) functionality. This feature enables the camera to adjust to varying lighting conditions, making it especially effective in environments with intense backlighting. WDR allows the camera to capture details in both shadows and highlights, ensuring that important details are not lost.

The WV-NW474S also emphasizes flexibility in installation and usage. It supports multiple codecs, including H.264 and Motion JPEG, and offers dual streaming capabilities. This flexibility allows users to choose the optimal compression format based on their network conditions and storage capacity. Furthermore, the camera features a user-friendly web interface for easy configuration and monitoring, making it accessible even for those with minimal technical expertise.

Additionally, the WV-NW474S is built to withstand various environmental challenges. It is designed with an IP66-rated housing, providing protection against dust and water ingress. This rugged design ensures reliable operation in outdoor settings or industrial environments, making it a dependable solution for security monitoring.

On the connectivity front, the WV-NW474S includes various network protocols, ensuring compatibility with diverse surveillance systems. It has the capability for Power over Ethernet (PoE), enabling power delivery and network connectivity through a single cable, simplifying installation.

In summary, the Panasonic WV-NW474S network camera combines high-resolution imaging, advanced WDR capabilities, robust environmental protection, and comprehensive connectivity options. These features make it an ideal choice for both commercial and residential surveillance needs, offering reliability and performance that users can trust. Whether for monitoring public spaces or securing private properties, the WV-NW474S stands out as a versatile and trustworthy security solution.
Top Page Image Contents