Panasonic WV-NW474S operating instructions Using Network Setup Menu, Dhcp DNS, Ddns

Page 18

5.Click the [Enable] button when using DHCP and DNS.

When using the DNS functions, enter the "Primary DNS Server address" and the "Secondary DNS Server address".

6.Click [AUTO] when the DNS server gets primary and secondary IP addresses from the DHCP server.

Notes:

•If DHCP is enabled although there is no DHCP server in the network, check "Disable" for DHCP in the "Panasonic IP Setup" window.

•If DHCP is enabled, and the DHCP server has not assigned an IP address yet, "0.0.0.0" is dis- played for the IP address. The IP address of the camera will be displayed after the DHCP server assigns one to the camera.

7.Click the [SET] button after completing the setting.

Important: It takes around 10 seconds for settings to take effect after the [SET] button has been pressed. The settings may be performed incorrectly if the power is off or the Ethernet cable is detached before the settings are completed.

Note: Do not make any other settings while executing Panasonic IP Setup.

1. Start up Internet Explorer on your PC.

2.Enter "http://192.168.0.10" (the default IP address of the camera) in the address bar.

●Using Network Setup Menu

On completion of the network setup of the PC, begin the network setup of the camera. If two or more cam- eras are connected, each camera needs to be set up individually. The following information is necessary for the network setup of the camera. If you do not have these information, contact your network administrator or Internet service provider.

•IP address

•Net mask

•Default gateway

•Host name

•Network speed

•HTTP port

•DHCP

•DNS

Primary DNS Secondary DNS

• DDNS

Host name User name Password Access interval

3. The Main Menu of the camera appears.

4.Click the [Setup Menu] button. The authentication dialog appears.

-18-

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operating Instructions For Canada Important Safety Instructions EnglishContents System Requirements FeaturesPreface TrademarksDocument Convention Never face the camera towards the sun PrecautionsHandle the camera with care Do not aim the camera at the same object for a long timeMajor Operating Controls & Their Functions @3Control connector 8DIP switch@2Video output connector @4Power cableInstallation space InstallationInstallation Plans & Preparations ProcurementOptional Heater Unit Mounting the CameraDisassembling the Camera Mounting the CameraCable length and wire gauge Power ConnectionWire colors & functions ConnectionsVideo Output Connection Image AdjustmentControl Connector Network Port ConnectionWaterproof Process Connection to Intranet Type Network Connection TypesDirect Connection to PC Type Connection to Internet TypeNetwork Setup of Your PC Preparations for Network ConnectionsNetwork Setup of the Camera Using Panasonic IP Setup SoftwareDNS Using Network Setup Menu Dhcp DNSDdns Page Camera Setup Menus Prior to Camera SetupButtons Used for Setup ALL Reset button¡From the Camera Setup Menu Tree Camera Setup Menu CAM Setting ProceduresSetup Selection Camera Identification Camera ID SettingTo edit the Camera ID Light Control Setting ALCCommand Usage To replace a specific character in the Camera IDGain Control Setting AGC on DNR-L, DNR-H/OFF Shutter Speed Setting ShutterElectronic Sensitivity Enhancement Sens UP Synchronization Setting Sync White Balance Setting White BALATW1 Auto-Tracing White Balance Manual Fine Adjustment for AWC ATW Motion Detector Setting Motion DETAutomatic White Balance Control Mode AWC Push SWMenu/DIP SW Selection Special Menu SpecialTo reset to the factory settings Camera Reset 10-7. BWNetwork Setup Network Setup Http Port NumberInitializing Initializing the Setup Menu Initializing Html FilesTroubleshooting Initializing the Camera MenuPrevention of Blooming and Smear SpecificationsTCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP Network SectionGeneral Standard AccessoriesOptional Accessories WV-CW2CAppendix Optional Heater Unit WV-CW3HWV-NW474S Préparatifs DE Connexion Réseau Avant LA Configuration DE LA Caméra VidéoPréface Procédure DE RéglageConditions système requises PréfaceCaractéristiques dominantes Marques commercialesConvention de ce document Mesures DE Précaution Manipuler la caméra vidéo sans brutalitésPrincipaux Organes DE Commande ET Leurs Fonctions @2Connecteur de sortie vidéo @3Connecteur de commande8Interrupteur DIP @4Cordon d’alimentationSe procurer Plans dinstallation et préparatifsEspace dinstallation Acheminement des câblesDémontage de la caméra vidéo Installation de la caméra vidéoInstallation de la caméra vidéo Dispositif de chauffage optionnelPrécautions ConnexionsConnexion dalimentation Couleurs des fils et fonctionsConnecteur de sortie vidéo Connecteur de commandeRéglages dimage Connexion de port réseauTraitement détanchéité Connexion directe à l’ordinateur personnel Type Accessoires indispensablesTypes de connexion de réseau Connexion à lIntranet TypeConfiguration de réseau de ’ordinateur personnel Préparatifs DE Connexion RéseauConfiguration réseau de la caméra vidéo Utilisation du menu de configuration de réseau Remarques Menus de configuration de caméra Vidéo Avant LA Configuration DE LA Caméra VidéoBoutons utilisés pour effectuer la Configuration Bouton ALL ResetLe bouton SET. Le menu CAM Setup souvre Partir de la caméra vidéoArborescence de menu de configuration Procédure DE Réglage Sélection de la configurationMenu de configuration de caméra vidéo CAM SET UP Paramétrage didentification de la caméra vidéo Camera IDMode ALC avec la fonction SUPER-D2 OFF Réglage de contrôle de lumière ALCUsage des instructions Réglage de la vitesse d’obturation Shutter Paramétrage de réglage de gain AGC on DNR-L, DNR-H/OFFRehaussement de la sensibilité électronique Sens UP Réglage de synchronisation Sync Réglage de balance des blancs White BAL Calage du détecteur de mouvementMotion Detect Menu/Sélection DIP SWMenu spécial Special 10-2. Réglage de niveau de chrominance Chroma GainZoom électronique EL-ZOOM Paramètre de phase de chrominance teinte HUE10-3. Réglage de gain d’ouverture AP SHARP/AP Soft Noir et blanc BWConfiguration de réseau Network Burst BWNuméro de port Http Dépannage Initialisation du menu de configurationInitialisation Initialisation du menu de caméra vidéoCaractéristiques Techniques Section réseauSection de caméra vidéo Accessoires Standard Accessoires OptionnelsGénérales Annexe Dispositif de chauffage optionnel WV-CW3HPage Panasonic Digital Communications & Security Company

WV-NW474S specifications

The Panasonic WV-NW474S is a high-performance network camera specifically designed for a variety of surveillance applications. This innovative model is known for its outstanding image quality, advanced features, and reliable performance in diverse environments. With a focus on enhancing security monitoring, the WV-NW474S integrates sophisticated technologies that set it apart in the competitive market of network cameras.

One of the main features of the WV-NW474S is its exceptional imaging capability. It is equipped with a 1/3-inch progressive scan CCD sensor, which delivers high-resolution video at 640x480 pixels. The camera supports both standard and high-definition streaming, enabling users to capture clear images even in challenging conditions. The incorporation of advanced digital signal processing ensures that the image quality remains consistent, reducing noise and improving visibility in low-light scenarios.

Another significant technological advancement in the WV-NW474S is its wide dynamic range (WDR) functionality. This feature enables the camera to adjust to varying lighting conditions, making it especially effective in environments with intense backlighting. WDR allows the camera to capture details in both shadows and highlights, ensuring that important details are not lost.

The WV-NW474S also emphasizes flexibility in installation and usage. It supports multiple codecs, including H.264 and Motion JPEG, and offers dual streaming capabilities. This flexibility allows users to choose the optimal compression format based on their network conditions and storage capacity. Furthermore, the camera features a user-friendly web interface for easy configuration and monitoring, making it accessible even for those with minimal technical expertise.

Additionally, the WV-NW474S is built to withstand various environmental challenges. It is designed with an IP66-rated housing, providing protection against dust and water ingress. This rugged design ensures reliable operation in outdoor settings or industrial environments, making it a dependable solution for security monitoring.

On the connectivity front, the WV-NW474S includes various network protocols, ensuring compatibility with diverse surveillance systems. It has the capability for Power over Ethernet (PoE), enabling power delivery and network connectivity through a single cable, simplifying installation.

In summary, the Panasonic WV-NW474S network camera combines high-resolution imaging, advanced WDR capabilities, robust environmental protection, and comprehensive connectivity options. These features make it an ideal choice for both commercial and residential surveillance needs, offering reliability and performance that users can trust. Whether for monitoring public spaces or securing private properties, the WV-NW474S stands out as a versatile and trustworthy security solution.
Top Page Image Contents