Panasonic WV-NW474S Network Setup of the Camera, Using Panasonic IP Setup Software, Dns

Page 17

7.Click the "Use the following IP address" radio button and enter the IP address and the subnet mask as follows.

IP address

: 192.168.0.9

Subnet mask

: 255.255.255.0

8.Click the [OK] button, and the window dialog box closes.

Note: Use a small sized picture when a blue picture appears instead of the live picture due to Internet traffic congestion.

■Network Setup of the Camera

●Using Panasonic IP Setup Software

Set up the network of the camera using the "Panasonic IP Setup" software included on the CD-ROM provided with the camera.

Notes:

•Do not access this menu through HTML or con- trollers during the Panasonic IP Setup procedure.

•Only one administrator is required.

•If a firewall (including software) exists, allow access to all UDP ports. Otherwise, it is impossible to use the "Panasonic IP Setup" software.

Double-click IP setup.exe.

The "Panasonic IP Setup" starts up.

The MAC address and the IP address of the connected camera will be displayed. (Click the [REFRESH] button if they are not displayed.)

1.Click the MAC ADDRESS/IP ADDRESS of the cam- era to be set up.

2.Click the [NETWORK SETUP] button. The setup window appears.

Notes:

•When two or more cameras are connected, the MAC addresses and the IP addresses of all the connected cameras will be displayed.

•The "Panasonic IP Setup" software can recognize only those cameras in the same subnet.

•Pressing the [REFRESH] button will display the updated MAC addresses and IP addresses of all the connected cameras that are in the same sub- net.

3.Set parameters for each item. "IP Address"

"Subnet Mask" "Default Gateway" "HTTP Port"

4.Input the parameters for your environment. "DHCP"

"DNS"

-17-

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operating Instructions For Canada English Important Safety InstructionsContents Preface FeaturesSystem Requirements TrademarksDocument Convention Handle the camera with care PrecautionsNever face the camera towards the sun Do not aim the camera at the same object for a long timeMajor Operating Controls & Their Functions @2Video output connector 8DIP switch@3Control connector @4Power cableInstallation Plans & Preparations InstallationInstallation space ProcurementDisassembling the Camera Mounting the CameraOptional Heater Unit Mounting the CameraWire colors & functions Power ConnectionCable length and wire gauge ConnectionsControl Connector Image AdjustmentVideo Output Connection Network Port ConnectionWaterproof Process Direct Connection to PC Type Network Connection TypesConnection to Intranet Type Connection to Internet TypePreparations for Network Connections Network Setup of Your PCDNS Network Setup of the CameraUsing Panasonic IP Setup Software Ddns Using Network Setup MenuDhcp DNS Page Buttons Used for Setup Prior to Camera SetupCamera Setup Menus ALL Reset button¡From the Camera Setup Menu Tree Setup Selection Setting ProceduresCamera Setup Menu CAM Camera Identification Camera ID SettingCommand Usage Light Control Setting ALCTo edit the Camera ID To replace a specific character in the Camera IDElectronic Sensitivity Enhancement Sens UP Gain Control Setting AGC on DNR-L, DNR-H/OFFShutter Speed Setting Shutter ATW1 Auto-Tracing White Balance Synchronization Setting SyncWhite Balance Setting White BAL Automatic White Balance Control Mode AWC Motion Detector Setting Motion DETManual Fine Adjustment for AWC ATW Push SWSpecial Menu Special Menu/DIP SW Selection10-7. BW To reset to the factory settings Camera ResetHttp Port Number Network Setup Network SetupTroubleshooting Initializing the Setup Menu Initializing Html FilesInitializing Initializing the Camera MenuTCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP SpecificationsPrevention of Blooming and Smear Network SectionOptional Accessories Standard AccessoriesGeneral WV-CW2COptional Heater Unit WV-CW3H AppendixWV-NW474S Préface Avant LA Configuration DE LA Caméra VidéoPréparatifs DE Connexion Réseau Procédure DE RéglageCaractéristiques dominantes PréfaceConditions système requises Marques commercialesConvention de ce document Manipuler la caméra vidéo sans brutalités Mesures DE PrécautionPrincipaux Organes DE Commande ET Leurs Fonctions 8Interrupteur DIP @3Connecteur de commande@2Connecteur de sortie vidéo @4Cordon d’alimentationEspace dinstallation Plans dinstallation et préparatifsSe procurer Acheminement des câblesInstallation de la caméra vidéo Installation de la caméra vidéoDémontage de la caméra vidéo Dispositif de chauffage optionnelConnexion dalimentation ConnexionsPrécautions Couleurs des fils et fonctionsRéglages dimage Connecteur de commandeConnecteur de sortie vidéo Connexion de port réseauTraitement détanchéité Types de connexion de réseau Accessoires indispensablesConnexion directe à l’ordinateur personnel Type Connexion à lIntranet TypePréparatifs DE Connexion Réseau Configuration de réseau de ’ordinateur personnelConfiguration réseau de la caméra vidéo Utilisation du menu de configuration de réseau Remarques Boutons utilisés pour effectuer la Configuration Avant LA Configuration DE LA Caméra VidéoMenus de configuration de caméra Vidéo Bouton ALL ResetPartir de la caméra vidéo Le bouton SET. Le menu CAM Setup souvreArborescence de menu de configuration Menu de configuration de caméra vidéo CAM SET UP Sélection de la configurationProcédure DE Réglage Paramétrage didentification de la caméra vidéo Camera IDUsage des instructions Mode ALC avec la fonction SUPER-D2 OFFRéglage de contrôle de lumière ALC Rehaussement de la sensibilité électronique Sens UP Réglage de la vitesse d’obturation ShutterParamétrage de réglage de gain AGC on DNR-L, DNR-H/OFF Réglage de synchronisation Sync Calage du détecteur de mouvement Réglage de balance des blancs White BALMenu spécial Special Menu/Sélection DIP SWMotion Detect 10-2. Réglage de niveau de chrominance Chroma Gain10-3. Réglage de gain d’ouverture AP SHARP/AP Soft Paramètre de phase de chrominance teinte HUEZoom électronique EL-ZOOM Noir et blanc BWNuméro de port Http Configuration de réseau NetworkBurst BW Initialisation Initialisation du menu de configurationDépannage Initialisation du menu de caméra vidéoSection de caméra vidéo Caractéristiques TechniquesSection réseau Générales Accessoires StandardAccessoires Optionnels Dispositif de chauffage optionnel WV-CW3H AnnexePage Panasonic Digital Communications & Security Company

WV-NW474S specifications

The Panasonic WV-NW474S is a high-performance network camera specifically designed for a variety of surveillance applications. This innovative model is known for its outstanding image quality, advanced features, and reliable performance in diverse environments. With a focus on enhancing security monitoring, the WV-NW474S integrates sophisticated technologies that set it apart in the competitive market of network cameras.

One of the main features of the WV-NW474S is its exceptional imaging capability. It is equipped with a 1/3-inch progressive scan CCD sensor, which delivers high-resolution video at 640x480 pixels. The camera supports both standard and high-definition streaming, enabling users to capture clear images even in challenging conditions. The incorporation of advanced digital signal processing ensures that the image quality remains consistent, reducing noise and improving visibility in low-light scenarios.

Another significant technological advancement in the WV-NW474S is its wide dynamic range (WDR) functionality. This feature enables the camera to adjust to varying lighting conditions, making it especially effective in environments with intense backlighting. WDR allows the camera to capture details in both shadows and highlights, ensuring that important details are not lost.

The WV-NW474S also emphasizes flexibility in installation and usage. It supports multiple codecs, including H.264 and Motion JPEG, and offers dual streaming capabilities. This flexibility allows users to choose the optimal compression format based on their network conditions and storage capacity. Furthermore, the camera features a user-friendly web interface for easy configuration and monitoring, making it accessible even for those with minimal technical expertise.

Additionally, the WV-NW474S is built to withstand various environmental challenges. It is designed with an IP66-rated housing, providing protection against dust and water ingress. This rugged design ensures reliable operation in outdoor settings or industrial environments, making it a dependable solution for security monitoring.

On the connectivity front, the WV-NW474S includes various network protocols, ensuring compatibility with diverse surveillance systems. It has the capability for Power over Ethernet (PoE), enabling power delivery and network connectivity through a single cable, simplifying installation.

In summary, the Panasonic WV-NW474S network camera combines high-resolution imaging, advanced WDR capabilities, robust environmental protection, and comprehensive connectivity options. These features make it an ideal choice for both commercial and residential surveillance needs, offering reliability and performance that users can trust. Whether for monitoring public spaces or securing private properties, the WV-NW474S stands out as a versatile and trustworthy security solution.
Top Page Image Contents