Panasonic WV-NW474S operating instructions Precautions, Handle the camera with care

Page 7

PRECAUTIONS

1.This product should be installed and connected in conformity with NEC by qualified service per- sonnel or system installers.

2.Use a class 2 power source supplying 24 V AC.

3.To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) to connect the power supply to the camera.

4.Be sure to use a ceiling board/wall having enough strength to support this camera.

5.Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Ask a qualified service personnel for servicing.

6.Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.

7.Do not use strong or abrasive detergents when cleaning the camera body.

Use a dry cloth to clean the camera when it is dirty. When the dirt is hard to remove, use a mild deter- gent and wipe gently. Care should be taken not to scratch the dome cover when wiping it.

Wipe off any remaining detergent in it with a dry cloth.

8.Never face the camera towards the sun.

Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.

9.Never aim the camera at strong light sources for an extended period of time.

A light source such as a spot light causes burn-in on the display screen. Failure to observe this may cause the image to become discolored due to dete- rioration of the color filter in the CCD.

10.Do not operate the camera beyond the specified temperature, humidity or power source ratings. Do not use the camera in an extreme environment where high temperature or high humidity exists. Do not place the camera near heat sources such as radiators, stoves or other units that produce heat. Use the camera under conditions where tempera- tures are between –10 °C and +50 °C (14 °F to 122 °F) and humidity is below 90 %.

The input power source is 24 V AC 60 Hz.

11.Do not install the camera near the air outlet of an air conditioner.

The lens may become cloudy due to condensation if the camera is used under the following conditions.

•Rapid temperature fluctuations by switching the air conditioner on and off.

•Rapid temperature fluctuations due to fre- quent opening and closing of a door.

•Use in an environment where eyeglasses become foggy.

•Use in a room filled with cigarette smoke or dust.

If the lens becomes cloudy due to condensation, remove the dome cover and wipe all moist surfaces with a soft cloth.

When installing, be sure to wipe off water drops and splashes inside the camera. Failure to do so may cause condensation.

12.Do not aim the camera at the same object for a long time.

Burn-in of an image may be caused on the fluores- cent screen of the CRT.

•Matsushita Electric Industrial Co., Ltd. herewith declares that it will not be liable for any damage, whether direct or indirect, caused by using the product for business transactions or security, or malfunctioning of this product.

-7-

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions For Canada English Important Safety InstructionsContents Trademarks FeaturesPreface System RequirementsDocument Convention Do not aim the camera at the same object for a long time PrecautionsHandle the camera with care Never face the camera towards the sunMajor Operating Controls & Their Functions @4Power cable 8DIP switch@2Video output connector @3Control connectorProcurement InstallationInstallation Plans & Preparations Installation spaceMounting the Camera Mounting the CameraDisassembling the Camera Optional Heater UnitConnections Power ConnectionWire colors & functions Cable length and wire gaugeNetwork Port Connection Image AdjustmentControl Connector Video Output ConnectionWaterproof Process Connection to Internet Type Network Connection TypesDirect Connection to PC Type Connection to Intranet TypePreparations for Network Connections Network Setup of Your PCUsing Panasonic IP Setup Software Network Setup of the CameraDNS Dhcp DNS Using Network Setup MenuDdns Page ALL Reset button Prior to Camera SetupButtons Used for Setup Camera Setup Menus¡From the Camera Setup Menu Tree Camera Identification Camera ID Setting Setting ProceduresSetup Selection Camera Setup Menu CAMTo replace a specific character in the Camera ID Light Control Setting ALCCommand Usage To edit the Camera IDShutter Speed Setting Shutter Gain Control Setting AGC on DNR-L, DNR-H/OFFElectronic Sensitivity Enhancement Sens UP White Balance Setting White BAL Synchronization Setting SyncATW1 Auto-Tracing White Balance Push SW Motion Detector Setting Motion DETAutomatic White Balance Control Mode AWC Manual Fine Adjustment for AWC ATWSpecial Menu Special Menu/DIP SW Selection10-7. BW To reset to the factory settings Camera ResetHttp Port Number Network Setup Network SetupInitializing the Camera Menu Initializing the Setup Menu Initializing Html FilesTroubleshooting InitializingNetwork Section SpecificationsTCP/IP, HTTP, FTP, SMTP, DNS, DDNS, DHCP, ARP, BOOTP, NTP Prevention of Blooming and SmearWV-CW2C Standard AccessoriesOptional Accessories GeneralOptional Heater Unit WV-CW3H AppendixWV-NW474S Procédure DE Réglage Avant LA Configuration DE LA Caméra VidéoPréface Préparatifs DE Connexion RéseauMarques commerciales PréfaceCaractéristiques dominantes Conditions système requisesConvention de ce document Manipuler la caméra vidéo sans brutalités Mesures DE PrécautionPrincipaux Organes DE Commande ET Leurs Fonctions @4Cordon d’alimentation @3Connecteur de commande8Interrupteur DIP @2Connecteur de sortie vidéoAcheminement des câbles Plans dinstallation et préparatifsEspace dinstallation Se procurerDispositif de chauffage optionnel Installation de la caméra vidéoInstallation de la caméra vidéo Démontage de la caméra vidéoCouleurs des fils et fonctions ConnexionsConnexion dalimentation PrécautionsConnexion de port réseau Connecteur de commandeRéglages dimage Connecteur de sortie vidéoTraitement détanchéité Connexion à lIntranet Type Accessoires indispensablesTypes de connexion de réseau Connexion directe à l’ordinateur personnel TypePréparatifs DE Connexion Réseau Configuration de réseau de ’ordinateur personnelConfiguration réseau de la caméra vidéo Utilisation du menu de configuration de réseau Remarques Bouton ALL Reset Avant LA Configuration DE LA Caméra VidéoBoutons utilisés pour effectuer la Configuration Menus de configuration de caméra VidéoPartir de la caméra vidéo Le bouton SET. Le menu CAM Setup souvreArborescence de menu de configuration Paramétrage didentification de la caméra vidéo Camera ID Sélection de la configurationMenu de configuration de caméra vidéo CAM SET UP Procédure DE RéglageRéglage de contrôle de lumière ALC Mode ALC avec la fonction SUPER-D2 OFFUsage des instructions Paramétrage de réglage de gain AGC on DNR-L, DNR-H/OFF Réglage de la vitesse d’obturation ShutterRehaussement de la sensibilité électronique Sens UP Réglage de synchronisation Sync Calage du détecteur de mouvement Réglage de balance des blancs White BAL10-2. Réglage de niveau de chrominance Chroma Gain Menu/Sélection DIP SWMenu spécial Special Motion DetectNoir et blanc BW Paramètre de phase de chrominance teinte HUE10-3. Réglage de gain d’ouverture AP SHARP/AP Soft Zoom électronique EL-ZOOMBurst BW Configuration de réseau NetworkNuméro de port Http Initialisation du menu de caméra vidéo Initialisation du menu de configurationInitialisation DépannageSection réseau Caractéristiques TechniquesSection de caméra vidéo Accessoires Optionnels Accessoires StandardGénérales Dispositif de chauffage optionnel WV-CW3H AnnexePage Panasonic Digital Communications & Security Company

WV-NW474S specifications

The Panasonic WV-NW474S is a high-performance network camera specifically designed for a variety of surveillance applications. This innovative model is known for its outstanding image quality, advanced features, and reliable performance in diverse environments. With a focus on enhancing security monitoring, the WV-NW474S integrates sophisticated technologies that set it apart in the competitive market of network cameras.

One of the main features of the WV-NW474S is its exceptional imaging capability. It is equipped with a 1/3-inch progressive scan CCD sensor, which delivers high-resolution video at 640x480 pixels. The camera supports both standard and high-definition streaming, enabling users to capture clear images even in challenging conditions. The incorporation of advanced digital signal processing ensures that the image quality remains consistent, reducing noise and improving visibility in low-light scenarios.

Another significant technological advancement in the WV-NW474S is its wide dynamic range (WDR) functionality. This feature enables the camera to adjust to varying lighting conditions, making it especially effective in environments with intense backlighting. WDR allows the camera to capture details in both shadows and highlights, ensuring that important details are not lost.

The WV-NW474S also emphasizes flexibility in installation and usage. It supports multiple codecs, including H.264 and Motion JPEG, and offers dual streaming capabilities. This flexibility allows users to choose the optimal compression format based on their network conditions and storage capacity. Furthermore, the camera features a user-friendly web interface for easy configuration and monitoring, making it accessible even for those with minimal technical expertise.

Additionally, the WV-NW474S is built to withstand various environmental challenges. It is designed with an IP66-rated housing, providing protection against dust and water ingress. This rugged design ensures reliable operation in outdoor settings or industrial environments, making it a dependable solution for security monitoring.

On the connectivity front, the WV-NW474S includes various network protocols, ensuring compatibility with diverse surveillance systems. It has the capability for Power over Ethernet (PoE), enabling power delivery and network connectivity through a single cable, simplifying installation.

In summary, the Panasonic WV-NW474S network camera combines high-resolution imaging, advanced WDR capabilities, robust environmental protection, and comprehensive connectivity options. These features make it an ideal choice for both commercial and residential surveillance needs, offering reliability and performance that users can trust. Whether for monitoring public spaces or securing private properties, the WV-NW474S stands out as a versatile and trustworthy security solution.
Top Page Image Contents