Step 2
Move the cursor to
ON (default): Activates the
ON
In addition to the
OFF: Deactivates the
Note:
•When "ON" or
SHUTTER: Only OFF and 1/100 are available. (☞ Page 11)
SENS UP: Only "OFF" and "AUTO" become available. (☞ Page 12)
•When "ON" or
•When "ON" or
•When flickering or noise is observed frequently due to the illumination of light, select "OFF".
(1)When flickering or color deterioration is observed
(2)When noise is produced in a bright area on the screen
•When
When using the SUPER-D5 function
Follow the procedure below.
Step 1
Move the cursor to "LEVEL" and use the right or left button to adjust the level.
Step 2
The dark area of the object is automatically corrected to lighten it.
Move the cursor to "MANUAL ABS" and press the setting button.
→The area setting screen appears.
Step 3
Move the cursor to "POSITION" and press the setting button.
Step 4
Use the up, down, right, and left buttons to determine the left upper position of the area to be set and press the setting button.
Step 5
Use the up, down, right, and left buttons to determine the right lower position of the area and press the setting button.
Note:
•To delete an area, move the cursor to "DEL" and press the setting button.
•The area to be brighter becomes circular.
•The bright level of an area cannot be specified.
•Only one area can be set.
10