Panasonic wv-cp500 About the setup menus, Setup menu list, Setup item Description, Reference

Page 4

About the setup menus

Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area.

The following is an example of setup procedure when LANGUAGE is set to ENGLISH.

Setup menu list

	Setup item	Description	Reference
	Setup item	Description	Pages
			Pages
CAMERA ID		This item specifies the camera title. The camera title that indicates the camera loca-
		tion and other information about the camera is created with alphanumerics and sym-	7
		bols, and is displayed on the screen.

CAMERA		Performs the camera operation settings.	8
	SCENE1/SCENE2	Selects a scene file. It is possible to register and save the settings as a scene file in
		case that it is necessary to change the settings such when shooting at night or on hol-	8
		idays.

	ALC/ELC	Selects the method of controlling the quantity of light in accordance with the lens to	9
		be used.

	SHUTTER	Specifies the electronic shutter speed.	11
	AGC	Specifies gain adjustment.	12
	SENS UP	Specifies electronic sensitivity enhancement.	12
	WHITE BAL	Specifies white balance adjustment.	12
	DNR	Selects the level of the digital noise reduction function.	14
	BW MODE	Performs each setting regarding the black-and-white mode such as switching	14
		between color and black-and-white images.

	i-VMD	Performs settings regarding intelligent VMD (Video Motion Detector) such as motion	15
		detection and object abandonment/removal detection.

SYSTEM		Performs the settings regarding the camera system such as synchronization, alarm	22
		input/output, and privacy zone.

	SYNC	Specifies the synchronization type.	22
	ALARM IN/OUT	Performs the settings of the ALARM IN connector and the ALARM OUT connector.	23
	PRIVACY ZONE	Hides undesired portions in the camera shooting area.	24
	STABILIZER	Decides whether or not to enable the image stabilizer.	25
	EL-ZOOM	Toggles the electronic zoom on and off.	26
BACK-FOCUS		Selects the back focus setting type and performs fine adjustment.	27
SPECIAL

	CHROMA GAIN	Adjusts the chroma level.	29
	AP GAIN	Adjusts the aperture level.	29
	PEDESTAL	Adjusts the pedestal (brightness) level.	29
	HUE	Adjusts the chroma phase (hue).	29
	PIX OFF	Corrects image defects such as flaws.	30
	COMMUNICATION	Performs the communication setting of the system with a receiver into which this unit	31
		is integrated.

	CAMERA RESET	Restores the settings in the setup menu to the default settings.	31
	SER.NO.	Displays the serial number of this unit.	31
LANGUAGE		Selects a language to be used in the setup menu.	32

4

Image 4

Contents WV-CP504 Preface Trademarks and registered trademarksContents About the setup menus Setup menu listSetup item Description ReferenceBasic operation StepScreen transition diagram Camera ID screenCamera title setting Camera ID Top screen Camera ID screenDisplay positioning screen Character entryScreen when SCENE2 is selected Screen when SCENE1 is selectedRegister a scene file SCENE1/SCENE2 SUPER-D5 setting Camera Setup screen ALC Cont screenArea setting screen Light quantity control method selection ALC/ELCWhen using the SUPER-D5 function When not using the SUPER-D5 function Electronic shutter setting ShutterMask setting screen Electronic sensitivity enhancement setting Sens UP Gain control setting AGCWhite balance setting White BAL VMD Digital noise reduction function setting DNR Black-and-white mode setting BW ModeManual fine adjustment of white balance Camera Setup screenPress the setting button → The BW Mode screen appears VMD setting i-VMD Perform the settings relating to the motion detectionDetect motion of objects Detect objects that move into the specified directionSet the detection sensitivity Set the minimum size of objects detected10s Set the detection areas Motion DET screen Object DET screenConfigure frame display Setting of scene change detectionCamera Setup screen VMD Setup screen Configure alarm notification Camera system setting System Setup Setting of the power supply synchronization LL modeFollow the procedure below System Setup screen Sync screen Synchronization method selection SyncConfigure the alarm input terminal settings Alarm input/output terminal setting Alarm IN/OUTSystem Setup screen Alarm IN/OUT screen Privacy zone setting Privacy Zone System Setup screen Zone setting screenImage stabilizer setting Stabilizer Electronic zoom setting EL-ZOOM Pan/tilt setting screenBack focus setting BACK-FOCUS Setup Back focus adjustmentABF Auto Special menu setting Special Setup Chroma level adjustment Chroma GainAperture level adjustment AP Gain Pedestal level adjustment PedestalPIX OFF screen Flaw compensation PIX OFFPixel compensation positioning screen Default resetting Camera Reset Communication setting CommunicationSerial number viewing SER.NO Language selection Language Setup System controller operation Setting contents Shortcut operationSystem controller operation Setting contents Panasonic Canada Inc Panasonic System Solutions CompanyPanasonic Sales Company Panasonic Puerto Rico, Inc

Related manuals

Manual 32 pages 9.29 Kb

Manual 35 pages 63.6 Kb