14. Electronic zoom setting [EL-ZOOM]
Select "On" or "Off" to determine whether or not to use the electronic zoom.
When "ON" is selected, the zoom factor and the panning/tilting settings can be configured.
ON: Uses the electronic zoom.
OFF (default): Does not use the electronic zoom.
Follow the procedure below.
"SYSTEM SETUP" screen | Zoom setting screen | Pan/tilt setting screen | |||||||||||
**SYSTEM SETUP** |
| ||||||||||||
SYNC | INT |
|
|
|
|
|
|
|
|
|
|
| |
ALARM IN/OUT |
|
| ZOOM |
|
|
|
|
|
| PUSH SW | ZOOM | PUSH SW | |
|
| PUSH | SW | ZOOM | |||||||||
PRIVACY ZONE | OFF | PAN/TILT | PUSH |
| SW |
| PAN/TILT | PUSH SW | PAN/TILT |
| PUSH SW | ||
|
|
|
|
|
|
|
|
|
|
| |||
STABILIZER | OFF |
|
|
|
|
|
|
| U ZOOM D | U TILT D/L PAN R | |||
ON |
|
|
|
|
|
|
|
|
|
|
|
| |
RET TOP END |
|
| RET TOP END |
|
|
|
| RET TOP END |
| RET TOP END |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
Step 1
Move the cursor to
→The
Step 2
Move the cursor to "PUSH SW" of "ZOOM" and press the setting button.
→The zoom setting screen appears.
Step 3
Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the up or down button.
Note:
• When the zoom factor is incremented, resolution will be deteriorated.
Step 4
Move the cursor to "PUSH SW" of "PAN/TILT" and press the setting button.
→The pan/tilt setting screen appears.
Step 5
Use the up, down, right, and left buttons to determine the image position and press the setting button. The position can be changed in the range of zoom factor set in the
Note:
•To reset to the default, hold down the right and left buttons simultaneously for approx. 2 seconds while the zoom setting screen or pan/tilt setting screen is displayed.
26