Panasonic WV-CP504, wv-cp500 Communication setting Communication, Default resetting Camera Reset

Page 31

Communication setting [COMMUNICATION]

The required communication configuration is performed to use this unit integrated into the system with a receiver. COAX (RCV): Select COAX (RCV) when using our receiver (e.g. WV-RC100 or WV-RC150).

COAX (default): Does not use any receiver.

Default resetting [CAMERA RESET]

The settings in the setup menu are restored to the default settings.

The default settings are restored by moving the cursor to "PUSH SW" of "CAMERA RESET" and holding down the right, left, and setting buttons for more than 2 seconds simultaneously.

Note:

•The data of the back focus setting and registered pixel compensation points is not cleared.

Serial number viewing [SER.NO.]

The serial number of this unit appears.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents WV-CP504 Trademarks and registered trademarks PrefaceContents Reference About the setup menusSetup menu list Setup item DescriptionStep Basic operationCamera ID screen Screen transition diagramCharacter entry Camera title setting Camera IDTop screen Camera ID screen Display positioning screenScreen when SCENE2 is selected Screen when SCENE1 is selectedRegister a scene file SCENE1/SCENE2 Light quantity control method selection ALC/ELC SUPER-D5 settingCamera Setup screen ALC Cont screen Area setting screenWhen using the SUPER-D5 function When not using the SUPER-D5 function Electronic shutter setting ShutterMask setting screen Electronic sensitivity enhancement setting Sens UP Gain control setting AGCWhite balance setting White BAL VMD Camera Setup screen Digital noise reduction function setting DNRBlack-and-white mode setting BW Mode Manual fine adjustment of white balancePress the setting button → The BW Mode screen appears Perform the settings relating to the motion detection VMD setting i-VMDSet the minimum size of objects detected Detect motion of objectsDetect objects that move into the specified direction Set the detection sensitivity10s Motion DET screen Object DET screen Set the detection areasConfigure frame display Setting of scene change detectionCamera Setup screen VMD Setup screen Configure alarm notification Synchronization method selection Sync Camera system setting System SetupSetting of the power supply synchronization LL mode Follow the procedure below System Setup screen Sync screenConfigure the alarm input terminal settings Alarm input/output terminal setting Alarm IN/OUTSystem Setup screen Alarm IN/OUT screen System Setup screen Zone setting screen Privacy zone setting Privacy ZoneImage stabilizer setting Stabilizer Pan/tilt setting screen Electronic zoom setting EL-ZOOMBack focus adjustment Back focus setting BACK-FOCUS Setup ABF Auto Pedestal level adjustment Pedestal Special menu setting Special SetupChroma level adjustment Chroma Gain Aperture level adjustment AP GainPIX OFF screen Flaw compensation PIX OFFPixel compensation positioning screen Default resetting Camera Reset Communication setting CommunicationSerial number viewing SER.NO Language selection Language Setup Shortcut operation System controller operation Setting contentsSystem controller operation Setting contents Panasonic Canada Inc Panasonic System Solutions CompanyPanasonic Sales Company Panasonic Puerto Rico, Inc
Related manuals
Manual 32 pages 9.29 Kb Manual 35 pages 63.6 Kb
Top Page Image Contents