Panasonic WV-CP504, wv-cp500 Detect motion of objects, Set the detection sensitivity

Page 17

Detect motion of objects

Move the cursor to "MOTION" and select from the following.

ON: Provides an alarm signal when motion is detected.

OFF (default): Does not detect motion.

Detect objects that move continuously within a specified period

Move the cursor to "LOITERING" and select the duration from the following:

When a continuously moving object is detected within a specified period, an alarm signal is issued. OFF (default)/ON (5 s)/ON (10 s)/ON (20 s)/ON (30 s)/ON (40 s)/ON (50 s)/ON (1 min)

Detect objects that move into the specified direction

Move the cursor to "DIRECTION" and select the direction from the following:

An alarm signal will be sent out when an object moves to the specified direction. OFF (default)/ON (c)/ON (c )/ON (a)/ON (a)/ON (d)/ON (d )/ON ([)/ON ([

Step 4

)

Move the cursor to "AREA" and select an area for which the motion detection is to be set. All the alarm actions selected in step 3 will be applied to this area.

ALL (default): All areas will be set as the detection area.

SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area. Refer to pages 20 for how to configure the settings.

Step 5

Move the cursor to "SENSITIVITY" and press the setting button.

The "SENSITIVITY" screen appears.

Step 6

Set the detection sensitivity and the minimum size of objects detected. Perform the setup while viewing the detection result dis- played on the screen.

Set the detection sensitivity

Move the cursor to "SENSITIVITY" and select one of the following options for the detection sensitivity: LOW (default)/MID/HIGH

Set the minimum size of objects detected

Move the cursor to "MIN SIZE" and select the minimum size of objects detected from the following: The size options will be dis- played in a green frame in the center of the screen. In "OFF" position, any object will be detected regardless of its size.

Perform the setup while viewing the detection result displayed on the screen. OFF (default)/SMALL/MEDIUM/LARGE

Note:

The detection sensitivity and minimum size selected in this step will be applied to all the alarm actions selected in step 3.

The detection areas set in step 4 will be displayed as a white frame on the "SENSITIVITY" screen.

When a motion is detected, a blue frame appears and changes to a red frame after a given time (approx. 1 sec.) on the

"SENSITIVITY" screen. In operation, an alarm signal is provided when the frame changes to red.

17

Image 17
Contents WV-CP504 Trademarks and registered trademarks PrefaceContents Setup menu list About the setup menusSetup item Description ReferenceStep Basic operationCamera ID screen Screen transition diagramTop screen Camera ID screen Camera title setting Camera IDDisplay positioning screen Character entryRegister a scene file SCENE1/SCENE2 Screen when SCENE1 is selectedScreen when SCENE2 is selected Camera Setup screen ALC Cont screen SUPER-D5 settingArea setting screen Light quantity control method selection ALC/ELCWhen using the SUPER-D5 function Mask setting screen Electronic shutter setting ShutterWhen not using the SUPER-D5 function White balance setting White BAL Gain control setting AGCElectronic sensitivity enhancement setting Sens UP VMD Black-and-white mode setting BW Mode Digital noise reduction function setting DNRManual fine adjustment of white balance Camera Setup screenPress the setting button → The BW Mode screen appears Perform the settings relating to the motion detection VMD setting i-VMDDetect objects that move into the specified direction Detect motion of objectsSet the detection sensitivity Set the minimum size of objects detected10s Motion DET screen Object DET screen Set the detection areasCamera Setup screen VMD Setup screen Setting of scene change detectionConfigure frame display Configure alarm notification Setting of the power supply synchronization LL mode Camera system setting System SetupFollow the procedure below System Setup screen Sync screen Synchronization method selection SyncSystem Setup screen Alarm IN/OUT screen Alarm input/output terminal setting Alarm IN/OUTConfigure the alarm input terminal settings System Setup screen Zone setting screen Privacy zone setting Privacy ZoneImage stabilizer setting Stabilizer Pan/tilt setting screen Electronic zoom setting EL-ZOOMBack focus adjustment Back focus setting BACK-FOCUS SetupABF Auto Chroma level adjustment Chroma Gain Special menu setting Special SetupAperture level adjustment AP Gain Pedestal level adjustment PedestalPixel compensation positioning screen Flaw compensation PIX OFFPIX OFF screen Serial number viewing SER.NO Communication setting CommunicationDefault resetting Camera Reset Language selection Language Setup Shortcut operation System controller operation Setting contentsSystem controller operation Setting contents Panasonic Sales Company Panasonic Puerto Rico, Inc Panasonic System Solutions CompanyPanasonic Canada Inc
Related manuals
Manual 32 pages 9.29 Kb Manual 35 pages 63.6 Kb

WV-CP504, wv-cp500 specifications

The Panasonic WV-CP500 and WV-CP504 are advanced surveillance cameras renowned for their reliability, image quality, and versatile features. These cameras are part of Panasonic's comprehensive line of surveillance solutions, designed to meet the demands of various commercial and industrial applications.

Both models are equipped with a high-resolution 1/3-inch CCD image sensor, capable of delivering stunning video quality at resolutions up to 540 TV lines for the WV-CP500 and 480 TV lines for the WV-CP504. This high resolution ensures that users can capture clear, detailed images, making it easier to identify subjects and monitor activities in real time.

One of the standout features of the WV-CP500 and WV-CP504 is their exceptional low-light performance. The cameras possess a minimum illumination capability of just 0.5 lux, which allows for effective monitoring even in dimly lit environments. This is particularly advantageous for security applications in areas with varying light conditions, such as parking lots and retail stores.

Both models also incorporate advanced technologies such as Adaptive Black Stretch and Automatic Gain Control (AGC). Adaptive Black Stretch enhances visibility in dark areas without affecting the bright areas of an image, allowing for a more comprehensive view of the scene. AGC helps ensure that the camera maintains optimal brightness levels, enhancing the image quality in changing lighting conditions.

In terms of practical features, the WV-CP500 and WV-CP504 offer multiple lens options, allowing users to customize their surveillance setup according to specific needs. The cameras support various mounting types, including ceiling and wall installations, making them versatile enough for a wide range of settings.

Panasonic has prioritized durability with these models, and both are designed to operate effectively in challenging environments. They feature robust housings that can withstand dust and moisture, which is critical in outdoor applications or industrial settings. The cameras are also equipped with advanced digital signal processing, which optimizes the image for superior clarity and detail.

Furthermore, the WV-CP500 and WV-CP504 are compatible with various Panasonic video management systems, enabling seamless integration into existing surveillance setups. This compatibility allows for efficient monitoring and management of multiple camera feeds, providing users with a comprehensive security solution.

In summary, the Panasonic WV-CP500 and WV-CP504 surveillance cameras offer excellent image quality, versatile mounting options, and robust durability. Their innovative features and technologies make them ideal choices for businesses and organizations looking to enhance security and monitor their premises effectively.