Axis Communications F44 Network Share, Click Unmount Card can now be removed, Format SD Card

Page 50

AXIS F44 Main Unit

System Options

3.Click Unmount.

4.The card can now be removed.

Format SD Card

NOTICE

Formatting the SD card will remove all data and recordings stored on the card.

Important

If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is inserted into the Axis product.

An SD card inserted into the product can be manually formatted to one of the supported file systems. To manually format the SD card, follow these steps:

1.Insert the SD card in the SD card slot.

2.Open the Axis product’s webpages and go to Setup > System Options > Storage.

3.Click SD Card.

4.Click Format and select the desired file system.

5.Click OK to start formatting the card.

Network Share

Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www.axis.com/products/cam_companion_software/supported.htm

Note

For NAS recommendations see www.axis.com

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field. Sub folders cannot be used.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Axis F44 Main Unit Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis F44 Main UnitConnectors Performance Considerations Connector Connectors and ButtonsNetwork Connector Power ConnectorLED Indicators Shorten Sensor Unit Cable Access from the Internet Access the ProductAccess from a Browser Set the Root PasswordLive View Configure Capture ModeSet Power Line Frequency Click Use HttpsManual Trigger Go to Setup EventsControls on the Live View To show the manual trigger buttons in the Live ViewAxis Media Control viewer toolbar AMC Audio ControlsAxis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingSet Up the Product Basic SetupPixel Counter Video and AudioVideo Stream Image264 Camera SettingsClick Save to apply the new settings Image Appearance Capture ModeGo to Setup Video & Audio Camera Settings Shutter & Gain Exposure SettingsWhite Balance Set Shutter toStream Profiles Privacy MaskQuad stream OverlayGo to Video & Audio Overlay Image Overlay ImageGo to Video & Audio Video Stream and select the Image tab Audio Modes Audio SettingsUse Overlay Text in an Action Rule Go to Events Action RulesAudio Input Audio OutputAudio Clips Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConfigUser Defined Links For more information about I/O ports, see I/O Ports onMotion Detection DetectorsCamera Tampering Go to Detectors Camera TamperingSet Up Motion Detection Windows Motion Detection ParametersAudio Detection Go to Detectors Audio DetectionApplications Install ApplicationGo to Setup Applications Application LicensesAxis F44 Main Unit Triggers Set Up Action RulesEvents Go to Events Action Rules and click AddActions Go to Events Recipients and click Add Add RecipientsRecipient Types Recipient Use with actionCreate Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click AddPlay Recording RecordingsFind Recordings Go to Recordings ListTo play a recording, follow these steps Export Video ClipRecording List Continuous Recording Go to Recordings ContinuousLanguages Users System OptionsSecurity IP Address FilterGo to System Options Security Ieee IeeeCertificates Date & Time Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Audio SupportBasic TCP/IP Settings NetworkAxis Video Hosting System Avhs Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 NTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPUPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM Bonjour StorageRTP/H.264 SD CardFormat SD Card Network ShareClick Unmount Card can now be removed To add a network shareSupport MaintenancePorts & Devices Advanced Reset to Factory Default Settings Symptoms, Possible Causes and Remedial Actions TroubleshootingUpgrade the Firmware Problems setting the IP addressProblems with streaming H.264 Product cannot be accessed from a browserProduct is accessible locally but not externally BasicSetup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general SettingsStorage and disk management problems Technical Specifications Image settings Function/group Specifications VideoResolutions CompressionMaintenance Built-in Function/group Specifications Data streamingInstallation Installation aids General CasingConnectors Audio Input Audio OutputPerformance Considerations M2.2

F44 specifications

Axis Communications has long been a leader in the field of network cameras, and its F44 series exemplifies this commitment to innovation and quality. The Axis F44 is designed primarily for surveillance and security applications across various environments. This camera's unique modular design allows for flexibility in installation, adapting to diverse user needs and specific site requirements.

One of the standout features of the Axis F44 is its dual-channel capability. This means it can support two separate camera heads, allowing users to monitor different areas simultaneously while using a single video management system. This flexibility not only saves costs in terms of installations but also maximizes coverage without needing multiple standalone cameras.

The F44 series is equipped with Axis's advanced Lightfinder technology. This feature ensures exceptional image quality even in low-light conditions, making it ideal for night surveillance. With its wide dynamic range (WDR), the F44 can capture details in complex lighting situations, such as brightly lit areas next to shadowed regions. The result is clear and balanced video footage, crucial for identifying potential threats or intruders.

Another highlight is the camera’s support for Axis Zipstream technology. This advanced compression algorithm optimizes bandwidth and storage usage without compromising video quality. By analyzing the scene and selectively compressing different regions of the video stream, Zipstream ensures essential details remain clear while reducing the overall file size. This is particularly beneficial for systems with limited bandwidth or storage resources.

The F44 also emphasizes user-friendly features, including remote configuration and management capabilities. This allows security personnel to make adjustments without being on site, saving both time and resources. Furthermore, the camera is built with an array of analytics tools that can be integrated into existing systems for enhanced functionality. These include motion detection, tampering alarm, and video analytics features which can be customized based on specific security needs.

In terms of construction, the Axis F44 series is robust and designed for durability. It is compliant with various weather-proofing standards, making it suitable for outdoor installations in various climatic conditions. The camera can also be outfitted with various lens options depending on the specific use case, further increasing its versatility.

In conclusion, the Axis F44 combines advanced imaging technologies, flexible installation options, and robust construction, making it an excellent choice for security professionals seeking reliable and high-performing surveillance solutions. Whether for urban or rural applications, the F44’s blend of features ensures it meets diverse surveillance requirements effectively.
Top Page Image Contents