Axis Communications F44 user manual Reset to Factory Default Settings

Page 53

AXIS F44 Main Unit

System Options

Reset to Factory Default Settings

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.

Note

The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup

To reset the product to the factory default settings:

1.Disconnect power from the product.

2.Press and hold the control button and reconnect power. See Hardware Overview on page 6 .

3.Keep the control button pressed for about 15–30 seconds until the status LED indicator flashes amber.

4.Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

5.Using the installation and management software tools, assign an IP address, set the password, and access the video stream.

Note

To reset a single channel to the original factory default settings, use the button provided in that unit’s web interface.

It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

53

Image 53
Contents Axis F44 Main Unit Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis F44 Main Unit Table of ContentsConnectors Performance Considerations Network Connector Connectors and ButtonsConnector Power ConnectorLED Indicators Shorten Sensor Unit Cable Access from a Browser Access the ProductAccess from the Internet Set the Root PasswordSet Power Line Frequency Configure Capture ModeLive View Click Use HttpsControls on the Live View Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls Axis Media Control viewer toolbarAxis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductVideo Stream Video and AudioPixel Counter Image264 Camera SettingsClick Save to apply the new settings Image Appearance Capture ModeGo to Setup Video & Audio Camera Settings White Balance Exposure SettingsShutter & Gain Set Shutter toQuad stream Privacy MaskStream Profiles OverlayGo to Video & Audio Overlay Image Overlay ImageGo to Video & Audio Video Stream and select the Image tab Use Overlay Text in an Action Rule Audio SettingsAudio Modes Go to Events Action RulesAudio Output Audio InputAudio Clips Default Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Audio Detection Audio DetectionGo to Setup Applications Install ApplicationApplications Application LicensesAxis F44 Main Unit Events Set Up Action RulesTriggers Go to Events Action Rules and click AddActions Recipient Types Add RecipientsGo to Events Recipients and click Add Recipient Use with actionSet Up Email Recipients Set Up RecurrencesCreate Schedules Go to Events Schedules and click AddFind Recordings RecordingsPlay Recording Go to Recordings ListTo play a recording, follow these steps Export Video ClipRecording List Go to Recordings Continuous Continuous RecordingLanguages Security System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Click Install certificate and upload the certificate Go to Setup System Options Security CertificatesDate & Time Audio SupportNetwork Basic TCP/IP SettingsAxis Video Hosting System Avhs Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS Configuration Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationFTP NAT traversal port mapping for IPv4UPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM RTP/H.264 StorageBonjour SD CardClick Unmount Card can now be removed Network ShareFormat SD Card To add a network shareSupport MaintenancePorts & Devices Advanced Reset to Factory Default Settings Upgrade the Firmware TroubleshootingSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct is accessible locally but not externally Product cannot be accessed from a browserProblems with streaming H.264 BasicVideo and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsStorage and disk management problems Technical Specifications Resolutions Function/group Specifications VideoImage settings CompressionInstallation Function/group Specifications Data streamingMaintenance Built-in Installation aids General CasingConnectors Audio Output Audio InputPerformance Considerations M2.2

F44 specifications

Axis Communications has long been a leader in the field of network cameras, and its F44 series exemplifies this commitment to innovation and quality. The Axis F44 is designed primarily for surveillance and security applications across various environments. This camera's unique modular design allows for flexibility in installation, adapting to diverse user needs and specific site requirements.

One of the standout features of the Axis F44 is its dual-channel capability. This means it can support two separate camera heads, allowing users to monitor different areas simultaneously while using a single video management system. This flexibility not only saves costs in terms of installations but also maximizes coverage without needing multiple standalone cameras.

The F44 series is equipped with Axis's advanced Lightfinder technology. This feature ensures exceptional image quality even in low-light conditions, making it ideal for night surveillance. With its wide dynamic range (WDR), the F44 can capture details in complex lighting situations, such as brightly lit areas next to shadowed regions. The result is clear and balanced video footage, crucial for identifying potential threats or intruders.

Another highlight is the camera’s support for Axis Zipstream technology. This advanced compression algorithm optimizes bandwidth and storage usage without compromising video quality. By analyzing the scene and selectively compressing different regions of the video stream, Zipstream ensures essential details remain clear while reducing the overall file size. This is particularly beneficial for systems with limited bandwidth or storage resources.

The F44 also emphasizes user-friendly features, including remote configuration and management capabilities. This allows security personnel to make adjustments without being on site, saving both time and resources. Furthermore, the camera is built with an array of analytics tools that can be integrated into existing systems for enhanced functionality. These include motion detection, tampering alarm, and video analytics features which can be customized based on specific security needs.

In terms of construction, the Axis F44 series is robust and designed for durability. It is compliant with various weather-proofing standards, making it suitable for outdoor installations in various climatic conditions. The camera can also be outfitted with various lens options depending on the specific use case, further increasing its versatility.

In conclusion, the Axis F44 combines advanced imaging technologies, flexible installation options, and robust construction, making it an excellent choice for security professionals seeking reliable and high-performing surveillance solutions. Whether for urban or rural applications, the F44’s blend of features ensures it meets diverse surveillance requirements effectively.