Panasonic GP-US932CUS, GP-US932CUE DC power connector DC 12V, 9RS-232C port RS-232C

Page 12

!812 V DC power connector [DC 12V IN]

This connector is used to connect an external DC power supply of 12 volts (2 A or more).

Important:

•A class 2 power supply of 12 V DC (10.8 to 13.2 volts) shall be used.

@2SDI output connector [SDI]

(* only for GP-US932CUS, GP-US932CUSE)

This connector provides HD-SDI or SD-SDI output sig- nals.

Important:

•Please use a high quality cable compatible with HD-SDI.

Compatible connector HR10A-7P-4S (73) manufac- tured by HIROSE ELECTRIC CO., LTD. (as of October 2007)

!9RS-232C port [RS-232C]

Pin arrangement of applicable connector

14

23

(Cable side)

This port is used to perform external control. Please contact your dealer for further information.

	(D-sub 9-pin connector,		Pin number	Signal
		female)	1	GND
			1	GND
	5	1	2	TXD
			3	RXD
			4	DSR
			5	GND
	9	6	6	DTR
	9	6	7	CTS
			7	CTS
			8	RTS
			9	GND

@0S-video output connector [S-VIDEO]

This connector provides the luminance signal (Y) output and color signal (C) output with synchronizing signals.

@1RGB/YPbPr connector [RGB/YPbPr]

This connector provides the RGB signal (red, green, and blue) output or the YPbPr signal (luminance, color difference B, and color difference R) output. The output signal can be set up with use of "OUTPUT SEL" in the SETUP menu. (☞ page 19)

	(D-sub 9-pin connector,		Pin number	Output signal
	(D-sub 9-pin connector,		1	GND
		male)	1	GND
		male)	2	GND
	1	5	2	GND
	1	5	3	R, Pr
			3	R, Pr
			4	G, Y
			5	B, Pb
			6	VIDEO
	6	9	7	SYNC
			8	GND
			9	GND

12

Image 12

Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Disclaimer of Warranty Limitation of LiabilityPrecautions Otherwise, lifetime of the internal parts may be shortened Preface Trademarks and Registered TrademarksMajor Operating Controls and Their Functions Camera headCamera control unit CCU Front2Camera cable connector Selection button SELUp/down/left/right buttons 0Color bar display/AWC button BAR/AWCRear DC power connector DC 12V @0S-video output connector S-VIDEO@1RGB/YPbPr connector RGB/YPbPr 9RS-232C port RS-232CInstallation/Connection Sample of camera mounting on ceilingHow to mount lens Setting Procedures Setup menuSetup items Description Basic operations Matrix Electric Zoom FreezeCamera title setting Camera ID Character entryELC setting ELC Manual setup of detection areaElectronic shutter setting Shutter Gain adjustment GainElectronic sensitivity enhancement setting Sens UP Output signal setting Output SELScene file setting Scene File DTL Mode Specifies the detailsRED DTL Adjusts the enhancement of red edge Gamma Performs gamma adjustmentKnee Adjusts the knee point White Clip Adjusts the white clip levelMatrix Adjusts the hue Black Stretch Toggles the black stretch function on and offChroma Gain Adjusts chroma gain Total PED Adjusts the pedestal levelWhen the color axis is unclear Color matrix splitting chartWhite balance setting White BAL Black balance setting Black BALSynchronization setting Sync Electronic zoom setting Electric ZoomDefault setting restoring Image freezing FreezeHow to display or operate the SEL menu How to assign settingsSEL Menu Button assignmentTroubleshooting SymptomSymptom Specifications GP-US932CU/GP-US932CUSGP-US932CUE/GP-US932CUSE Standard Accessories Optional AccessoriesPage Panasonic System Solutions Company For business users in the European UnionPanasonic Canada Inc Panasonic Sales Company