Panasonic GP-US932CUE, GP-US932CUS operating instructions Troubleshooting, Symptom

Page 26

Troubleshooting

Before asking for repairs, check the symptoms with the following table.

Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below.

Symptom

No image displayed

Camera with no response to the button operation on the front face of the CCU

The lighting LED of the [SCENE] button unchanged

The lighting LED of the [GAIN] button unchanged

Only the color bar displayed

The hue [MATRIX] unad- justable in the menu

Cause/solution

•Are the cables appropriately connected to the video output connector, S-VIDEO output connector, RGB/YPbPr output connector, HDMI output connector, or SDI output connec- tor, respectively?

Check whether each cable is appropriately connected.

•Is the monitor luminance appropriately adjusted, or is the contrast appropriately adjusted?

Check whether the monitor settings are appropriate.

•Is the function setup switch No. 4 set to "ON"? Set the function setup switch No. 4 to "ON".

•Pressing once displays the state.

Press the [SCENE] button repeatedly until your target LED lights.

•Pressing once displays the state.

Press the [GAIN] button repeatedly until your target LED lights.

•Is the camera cable appropriately connected at both the connector of the CCU and the connector of the camera head?

Check whether the connection is appropriately established.

•Is the camera cable appropriately connected at both the connector of the CCU and the connector of the camera head?

Connection between the camera head and camera cable is required to adjust the image quality.

Check whether the connection is appropriately established.

Reference

pages

11, 12

—

11

9

9

9

9

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Disclaimer of Warranty Limitation of LiabilityPrecautions Otherwise, lifetime of the internal parts may be shortened Preface Trademarks and Registered TrademarksCamera control unit CCU Major Operating Controls and Their FunctionsCamera head FrontUp/down/left/right buttons 2Camera cable connectorSelection button SEL 0Color bar display/AWC button BAR/AWCRear @1RGB/YPbPr connector RGB/YPbPr DC power connector DC 12V@0S-video output connector S-VIDEO 9RS-232C port RS-232CInstallation/Connection Sample of camera mounting on ceilingHow to mount lens Setup items Description Setting ProceduresSetup menu Basic operations Matrix Electric Zoom FreezeCamera title setting Camera ID Character entryELC setting ELC Manual setup of detection areaElectronic sensitivity enhancement setting Sens UP Electronic shutter setting ShutterGain adjustment Gain Output signal setting Output SELRED DTL Adjusts the enhancement of red edge Scene file setting Scene FileDTL Mode Specifies the details Gamma Performs gamma adjustmentMatrix Adjusts the hue Knee Adjusts the knee pointWhite Clip Adjusts the white clip level Black Stretch Toggles the black stretch function on and offWhen the color axis is unclear Chroma Gain Adjusts chroma gainTotal PED Adjusts the pedestal level Color matrix splitting chartWhite balance setting White BAL Black balance setting Black BALDefault setting restoring Synchronization setting SyncElectronic zoom setting Electric Zoom Image freezing FreezeSEL Menu How to display or operate the SEL menuHow to assign settings Button assignmentTroubleshooting SymptomSymptom Specifications GP-US932CU/GP-US932CUSGP-US932CUE/GP-US932CUSE Standard Accessories Optional AccessoriesPage Panasonic Canada Inc Panasonic System Solutions CompanyFor business users in the European Union Panasonic Sales Company
Top Page Image Contents