Panasonic GP-US932CUS Knee Adjusts the knee point, White Clip Adjusts the white clip level

Page 21

Important:

In the case of the following, "---" appears and gamma adjustment is not available.

When "BLACK STRETCH" is set to "ON"

When "D-RANGE" is set to "EXPAND"

[KNEE] Adjusts the knee point.

Be sure to view a waveform monitor or a color video monitor when the knee point adjustment is performed.

The knee point adjustment is selectable from the following. MANU (default): The knee point is manually adjusted. AUTO: The knee point is automatically adjusted.

When "MANU" is selected, follow the steps below to adjust the knee point.

zSelect "MANU" and press the [SEL] button.

The "KNEE MANU" screen appears.

xAdjust the knee point with use of the [e] or [f] button.

Important:

When "D-RANGE" is set to "EXPAND", the knee point adjustment is disabled.

"KNEE MANU" screen

** KNEE

MANU **

KNEE POINT

 

........+

RET END

[BLACK STRETCH] Toggles the black stretch function on and off.

Selection "ON" or "OFF" (default) determines whether or not to perform the black stretch function.

When "ON" is selected, black crushing is corrected at low illuminance to make an image more viewable.

Important:

When "D-RANGE" is set to "EXPAND", the black stretch setting is disabled.

[D-RANGE] Toggles the dynamic range between NORMAL and EXPAND.

The dynamic range is set to "NORMAL" (default) or "EXPAND".

Selection of “EXPAND” makes high contrast images more viewable.

[WHITE CLIP] Adjusts the white clip level.

Be sure to view a waveform monitor or a color video monitor when the white clip level is adjusted with use of the [e] or [f] button.

When the level indicator moves in the "+" direction, the level becomes higher. When the level indicator moves in the "–" direction, the level becomes lower.

Important:

When "D-RANGE" is set to "EXPAND", the white clip adjustment is disabled.

[FLARE COMP] Performs flare compensation.

Selection "ON" or "OFF" (default) determines whether or not to perform the flare compensation.

When "ON" is selected, flare is reduced.

[DNR] Specifies the level of the digital noise reduction function.

The digital noise reduction function reduces noise. The effect level is selectable from the following.

LOW (default): The low level of digital noise reduction is performed. (smaller residual image)

HIGH: The high level of digital noise reduction is per- formed. (larger residual image)

OFF: The digital noise reduction function is disabled.

[MATRIX] Adjusts the hue.

Be sure to view a vector scope or a color video monitor when the hue adjustment is performed.

"SCENE FILE" screen

** SCENE FILE 1 ** P2

FLARE COMP

 

OFF

DNR

 

LOW

MATRIX

 

*USER

...+

CHROMA GAIN

.....

TOTAL PED

–........+

RET END

 

 

 

"MATRIX" screen

**MATRIX ** USER

B PHASE —........+

B GAIN

—........+

USER AREA *

RET END

z Display your target color in the screen center as large as possible.

x Select the axis close to your target color using "MATRIX" on the "SCENE FILE" screen. The axis is selectable from the following.

21

Image 21
Contents Operating Instructions Risk of Electric Shock Do not Open Important Safety Instructions Contents Limitation of Liability Disclaimer of WarrantyPrecautions Otherwise, lifetime of the internal parts may be shortened Trademarks and Registered Trademarks PrefaceCamera head Major Operating Controls and Their FunctionsCamera control unit CCU FrontSelection button SEL 2Camera cable connectorUp/down/left/right buttons 0Color bar display/AWC button BAR/AWCRear @0S-video output connector S-VIDEO DC power connector DC 12V@1RGB/YPbPr connector RGB/YPbPr 9RS-232C port RS-232CSample of camera mounting on ceiling Installation/ConnectionHow to mount lens Setting Procedures Setup menuSetup items Description Matrix Electric Zoom Freeze Basic operationsCharacter entry Camera title setting Camera IDManual setup of detection area ELC setting ELCGain adjustment Gain Electronic shutter setting ShutterElectronic sensitivity enhancement setting Sens UP Output signal setting Output SELDTL Mode Specifies the details Scene file setting Scene FileRED DTL Adjusts the enhancement of red edge Gamma Performs gamma adjustmentWhite Clip Adjusts the white clip level Knee Adjusts the knee pointMatrix Adjusts the hue Black Stretch Toggles the black stretch function on and offTotal PED Adjusts the pedestal level Chroma Gain Adjusts chroma gainWhen the color axis is unclear Color matrix splitting chartBlack balance setting Black BAL White balance setting White BALElectronic zoom setting Electric Zoom Synchronization setting SyncDefault setting restoring Image freezing FreezeHow to assign settings How to display or operate the SEL menuSEL Menu Button assignmentSymptom TroubleshootingSymptom GP-US932CU/GP-US932CUS SpecificationsGP-US932CUE/GP-US932CUSE Optional Accessories Standard AccessoriesPage For business users in the European Union Panasonic System Solutions CompanyPanasonic Canada Inc Panasonic Sales Company