Panasonic GP-US932CUE, GP-US932CUS operating instructions How to mount lens

■How to mount lens

Important:

•Be sure to turn off the power of the CCU before mounting a lens.

•A lens whose projection length of the lens mount section is 4 mm or less shall be used.

•The recommended lens aperture ranges from F2.2 to F16. Selection of less than F2.2 of the lens aperture may result in image blurring.

•When a zoom lens is used, focus adjustment method varies with the lens. For further information, refer to the operating instructions for the lens.

•When the lens is removed, be sure to put the cap on the lens mount section of the camera head.

C-mount:

less than 4 mm {5/32"}

zRemove the lens cap from the lens mount section of the camera head.

x Turn a C-mount lens clockwise to engage the lens with the lens mount section.

Important:

•Check to see whether the surface of the optical filter is clean before mounting a lens. If the surface is dirty, use a blower brush for general camera to remove dust.

Recommended lenses (as of October 2007)

Manufacturer	Model	Model number
FUJINON	High Definition Fixed Lens	HAF4.8DA-1
FUJINON	High Definition Zoom Lens	HA4x7.5DA-1
FUJINON	3CCD Camera Lens	TF2.8DA-8
FUJINON	3CCD Camera Lens	TF4DA-8
FUJINON	3CCD Camera Lens	TF8DA-8
FUJINON	3CCD Camera Lens	TF15DA-8

14